Recce Stuart Build for JC
Posted: Mon Mar 21, 2011 3:55 pm
While waiting for detail parts to arrive from ECA for the Shermans I decided to do some work on the recce Stuart for JC(Geoff). In the first 2 pics I have gutted the lower hull and added floor stand-offs. I also extended the back wall of the crew compartment and added wings on either side to close off the sponsons. Here are the pics of the gutted hull.
The next series of pics are of the insert for the crew compartment. The 1st 3 pics are the just the hull insert. The masking tape will be removed once the glue has set. I will then carefully sand off all the paint on the inside of the hull insert.
The next 2 pics are of the insert in the hull. At this point it is removeable. As always comments are welcomed..... Harold
The next series of pics are of the insert for the crew compartment. The 1st 3 pics are the just the hull insert. The masking tape will be removed once the glue has set. I will then carefully sand off all the paint on the inside of the hull insert.
The next 2 pics are of the insert in the hull. At this point it is removeable. As always comments are welcomed..... Harold