RC Tank Warfare community hobby forum

I might need stronger glasses.

I opened up my PIII yeterday,and found it had an old board instead of an RX18,no problem I have a spare RX18.

My problem is I cant find the Xtals in either the tank or the control box,it's a non S&S,obviously if I fit a new board I have to transfer the Xtal from the old board,or do I how small are they ?

Help please.

OK you have a non some and sound so if you have a full Rx18 that's the black box and the rec board if you look at the rec board you will see 2 round solder holes for the crystals to go in the Rx go in the rec small board and the TX go in the hand set right hand side bottom Conner if you have a non smoke and sound transmitter then it wont have this so you need to get the transmitter and crystals that's saying you have all the rx 18 bits and wires the volume switch is wired different as well

Thanks Dave,makes sense now.

To used to the luxury of RX's on 1/10th RC 4x4,you don't sell magnifying glasses too?

Dave

i can sell what ever you need lol glad to be of help thanks dave