RC Tank Warfare community hobby forum

Hi does anyone know of a supliyer of the early Jagdpanther conversion kit to the earlyer version ? Steve ? and how much these are . As I might end up scratching it . Although not just yet hmmmmmm.

Thanks Andy

hi there yes

welsh dragon is the only uk supplier

the kit .. ok ... but if your not too experenced .. i would not attempt the conversion....

you need to remove the whould engine deck and have to be super accurate at doing so ..

the replacement deck id 4.5 mm to short . so there is a gap at the back end whcich i ended up makeing a new rear centre engine deck pannel

the kitt contains a replacement gun mantle .. but it useless as it has no location luggs for fitting in place to the front of the bb gun
so you end up rehashng the hl mantle fit...

the barrel i had was bent .. i tryed evey trick in the book to get corrected and gave up .. so ended up spending out on a shcumo barrell ( £45 )

if i remember right it cost me £112 for the profiline conversion + £45 for a barrel

i would only give this kit 2 out of 10.. its well made...but it felt like i was trying to fit ford parts to a vw ...

nice jag but what is the difference between the late and early looking i cant tell

Hi thanks I might scratch it . Im modeling my one on a Jagdpanther from the 3rd company of s.PZ.Jg.Abt. 654 . Theres several photos of this unit using the early Jagdpanthers but with the later two part barrel (in the 3rd company) . The one I have is the HL recoil version . I feel the collar can be made , Im sure WDM sells the circular engine grills , Ive made the oblong ones before and the other detail can be made / altered . I have a set of early exhausts . Im not sure if I will fit extra storage locker on the suporstructor tho as not sure if this units had them ? will look into that . Many thanks for the advice and you have a real nice Jagdpanther there mate .

Thanks Andy

Hi Daisycutter , The early Jagdpanther had the folowing differances to my knowledge:

Smooth colar around barrel no bolts , ( and then a bigger collar with bolts top and bottom ),

Engine grills same as Panther A not like the later Panther G,

No crew heater,

Exhausts standard Panther A ones , some had cooling pipes added late ones had flame arestors,

Barrels on first models in one piece later ones two piece (although the tank Im representing is an early one it does have a two piece barrel),

Tooling still mounted on the sides (this only changed on the real late version were they were fitted on the rear suporstructor and engine deck , I think )

Theres diferances on the rear engine deck to.

Oh and most early ones were zimerited.

Andy

here is a pic of an early jag

Hi thats it . Is that the one from the Imperial war museum ? The one in this picture is from the Abt 654 in Normandy . This is what Im looking into representing . Its the early model but has the later two piece barrel.

Yep,
Thats the Imperial war museum jagadpather for sure !

Heres the scratch built early collar and one piece recoiling barrel also Ive added the blanking plate for were the now removed second periscope would be , later models didnt need this .Its not perfect but I couldnt get the Profiline kit . I would like some advice please on the mantlet as Ive seen posts before regarding altering this ?