Page 1 of 1
H/L return rollers
Posted: Sun Jul 18, 2010 7:41 pm
by KV1s
Hi Guys
Kv nearly all stripped ready for painting,tracks etc..
1 thing holding me back,do the return rollers come off as i have looked at several options and none seem to work
Aaron
Re: H/L return rollers
Posted: Mon Jul 19, 2010 2:08 pm
by daisycutter
yes but there are REALLY in there and can take some force to remove,careful you dont damage the hull trying
Re: H/L return rollers
Posted: Mon Jul 19, 2010 3:13 pm
by KV1s
i did try but they didnt want to budge so i sprayed them in situ..
Re: H/L return rollers
Posted: Thu Jul 22, 2010 6:17 pm
by starktiger 1
Hi
I used two forks
them big ones you use to eat steak with.
Make sure you finish your steak first though
there is nothing worse than a piece of steak stuck in the wheels
Jon
Re: H/L return rollers
Posted: Wed Aug 04, 2010 6:45 pm
by kclank
i just did mine. i laid the lower hull on it's side, put a couple of wood blocks around the whell mount and tapped out the pin with a hammer and pin punch.