RC Tank Warfare community hobby forum

Hi does anyone know if theres plans for a 1:16 SdKfz 251 and 250 RC by anyone ? Or is it possible to addapt the US halftrack by lengthening it and making the 251 or 250 top ? I have the 21st centuary 1:18 static kit and did plan on rc ing this but its a tad beyond me I think . But Id feel comfy making a scratch built one ? The other issue would be the tracks . As my 1:18 ones theres a kink in one so it comes of the sprocket as it moves .

Andy

Hi Andy I have the same one as you and thought about trying to RC it but never got round to it. I think it would be possible to put the back running gear off the 21st century one and scratch the rest of it the panels are all flat so it would'nt be that difficult but there are rummours of a hamo or famo comming out so is it worth the hastle.
Stevie

Hi Stevie , Yer I thought I had heard something that was another reason for not starting the 21st cent conversion . Im happy making one from styrene . just Im not so hot on the RC electronics side hence the thought of butchering a US RC halftrack ? If ones coming out thats good . There is several 1:18 static 251s converted to RC .

Andy

Hi can anyone post a pict of the underside of the US RC 1:16 halftrack please and how long/wide is it please. Just a thought but if ones coming out its probally better to wait.

Thanks Andy

MModell.de showed a preview pic around christmas, there was supposidly 12 variants in the works.

Hi Ive seen that asiatam are making tracks and sprockets for the Famo and also a Chassis,I thought I saw that they were going to make metal tracks for the 251 ,so there may be someone is going to make one .

regards pete

Hi all thanks for that still be intrested in a underview of the US halftrack and the overall length and width measurments . Im sure any German halftrack would be popular . Id prefer the 250 and 251personally.

Andy

The only ones available at the moment in 1/16 are these ones http://mk-modelle.de/index.php?list=KAT09" onclick="window.open(this.href);return false;
the running gear is from the 1/24 panther (tamiya?) but they look ok

Cheers Ian

Hi Found this at asiatam http://66.196.80.202/babelfish/translat ... be9df2792b" onclick="window.open(this.href);return false;

251 tracks metal ones .there must be something out there to fit them too.

regards pete

Several scratch built versions on the net and on youtube