RC Tank Warfare community hobby forum

Not certain if this is where i should ask this,look at every topic i thought that might be a help,even noticed the 2010 tank fest is this week end,Maybe some day ill make it there .have fun to all you lucky people that will be going. my question is for the hl tiger 1 road wheels that had them filled with resin and then the thick tire was cut down the middle to represent two tires.if some one nows of this post i would thank you for your help.thanks Wayne

Sounds like a lot of work, possibly someone this weekend could check for WSN TIGER wheels. They are a great set of wheels as they are rubber lined and individually spaced. Maybe some one has upgraded to metal and will have a set to sell reasonably cheap. They do work well.

cheers Blake

Sounds good,the WSN Tiger wheels,where does one get them,I am aware that mato sells them and someone had posted that they were not worth the money,these wheels for the WSN tiger are not the same ones? thanks for your reply Blake.
I just notice where you are from, are there any tank clubs around ,I'm planing to move there in the future. thanks Wayne

Wayne, the set I am talking about are the factory set that came on the older Tigers. Their plastic but much better detail. Another member sent me a set several months back. I use DU-BRO 3.5mm shoulder bolts for axles and tapped the control arms to the same thread. Which lower hull do you have? I've used the Asiatam Tiger Hull but the H/L hull with metal control arms can be set up with threaded control arms. What part of the country do you live in now? Blake

I have 3 stock heng long hull and 1 Asiatam metal hull.metal swing arms. im intrected in using it on the stosk hl hull. I have not seen much as far as WSN parts for sale on the net ,nor have i seen an WSN tiger 1.these DU-BRO 3.5 mm shoulder bolts for the axles where did you pick them up? I in S.I.N.Y. I have family in Kodak and Knoxville.

Hi Chiefsonn
There is a post on Hobby Havoc ....Joensis tiger 1 mod
link
http://www.hobbyhavoc.com/forum/index.p ... 05#msg1905" onclick="window.open(this.href);return false;

about page 5 he filled the wheels with resin and lathed the two wheels from one
cheers
gra

http://www.udisco.com/hobbies/inv/DUBRO.HTM" onclick="window.open(this.href);return false; here is a link to DU-BRO hardware,they make a large selection of hardware. Bolts, washers, nuts, clevis pieces,threaded rod, nylon washers and screws. Good luck with the wheels. Blake

Thank you both Blake,and Gra,that's what i was looking for thanks. Wayne