RC Tank Warfare community hobby forum

Bit of help please!

Just bought a Heng Long High intensity flash from Forgebear (thank you Dave) for my Heng Long Jagdpanther and was wondering how to take out the one that comes in the kit.

I thought I would ask before I broke something!

Is the LED glued in... Hum better wait for some answers.

Cheers

Hi Phil. The LED's in my Panther and Jagdpanther barrels were a friction fit ( There is a soft plastic sleeve over the back of the LED which gives a snug fit inside the barrel ). Just unscrewed the muzzle break and gentley pushed the LED back up the barrel with a length of tubing I had handy ( 5mm ). It will be interesting to see how I will get them back in. Hope this helps.
Alan

Thanks Alan

I’ll give it a go, think I’ll use the same technique I use for my RC Heli’s when I fit a new boom and have to tread the new belt through.

I tie a bit of string to the end of the belt and let that drop through, then pull the belt trough, should work for the Flash lead.

Phil

Good idea, have to give that a go when I put mine back in. Cheer's.
Alan