RC Tank Warfare community hobby forum

Hi All,
I was just in the process of posting my plans when the server fell over - now we're back in buisness it must be time to get them up here:
The Panzer III plans only cover the turret (the example I modelled only had turret shields for some reason?), the Panzer IV has hull and turret.
As you can see, the PzIV is still a work in progress, I'll update the plans when I finish mounting the side skirts.

Cheers Ex-Pat,

Am expecting delivery of another PzIII tomorrow.
Gonna give it the works. 

Cheers
John

Hi John,
Let me know how you get on - the turret brackets should work ok as I had a "worked example" to go by... The hull brackets were a bit more hit and miss  :-\
Cheer's
Mart

hey ex pat' ive downloaded both, thanks, do you think the p4 side bits could be adapted to fit the p3? katie, my daughter would like to have it on her p3, which she is getting for x-mas

            Tony

Hi Tony,

I don't think the upper brackets can, the spacing between the hull and the edge of the track guard is different. You would probably be best taking the basic shap of the front bracket and "crushing" it a bit to allow for the lower hull  :-\
I'll have a looksie at that later on today 
The L shaped lower brackets will be ok, they stick out about 9mm from the edge of the track guard (see attached)

I used K&S 1/32" x 1/18" brass bar for the brackets, btw

Hi Tony there differant will have a look see if Ive got them .


     regards pete

here

Having trouble downloading will try again

here are 2 i found hope these help its all ive got
regards pete

don't supposed you kept any plans for those parts, Pete?
I have the front bracket figured out, but the rear and the one under the radio areial trough are difficult to make out on the PzIII M plan