RC Tank Warfare community hobby forum

Hi
Can anyone help me with finding a supplier ,who sells the tamiya connectors which plug into the multi function unit.
These plugs are located on the wiring for
gun recoil , mechine gun , tamiya battle unit, ir emitter
These plugs are white in colour ,fit only one way round ,and vairy in size from 2 to 5 wires per plug
I am needing the plugs and and spades for a rewire job.

These are the style, available in different pinouts. I think you need to order the pins separately, plus there is a minimum order charge.

http://gb.mouser.com/ProductDetail/Mole ... OAvw%3d%3d" onclick="window.open(this.href);return false;

Hi You need 5 pin and 2 pin plugs to wire the battle units in you also need the inserts .this is about the only place to order them .so make it worth while ordering them ,why not put a post up asking if anyone would like some to share because there is a large handling fee ,I would like at least 10 of each plus inserts for 20 sets ,the one shown in the link is for 4 pin the last number for 5 pin is 500 for 2 pin 200 .part no for inserts is 538-50011-8100

regards pete

Ignore my previous post - these are not the right connectors.