replacing muffler pipe (bulldog)
Posted: Thu Dec 31, 2009 2:18 pm
heres an idea from mal over at hobby havoc for replacing the apu muffler hose on the bulldog
first get some net curtain wire
remove the white plastic covering
next get some house hold copper wire cable heavy duty 3 core
cut the new piece to size and push the copper wire up the centre of the curtain wire
offer it up and bend to shape the copper wire up the centre helps it to hold its shape
remove the old plastic pipe and drill a 2mm hole in the muffler to accept the copper wire
the finished muffler pipe painted and fitted remember this will show the steel through just like the original and shouldnt need a heavy coat just a wash or drybrush will be good
first get some net curtain wire
remove the white plastic covering
next get some house hold copper wire cable heavy duty 3 core
cut the new piece to size and push the copper wire up the centre of the curtain wire
offer it up and bend to shape the copper wire up the centre helps it to hold its shape
remove the old plastic pipe and drill a 2mm hole in the muffler to accept the copper wire
the finished muffler pipe painted and fitted remember this will show the steel through just like the original and shouldnt need a heavy coat just a wash or drybrush will be good