RC Tank Warfare community hobby forum

I have a Tamya 1/16 jagdpanther.

In my opinion, the sound of the Henlong 7.1 board is much better than the pure Tamya engine sound.

I was also interested in the clock board, but the Henlong is more attractive in many ways.

When installing the Henlong 7.1 board in the Tamya jagdpanther like this,

I think the recoil parts seems to be the only additional work other than changing the jst connector, but should I replace the Cannon up, down, left, right motor or speaker? What about the driving motor?

There shouldn't be any problems connecting the Tamiya to the Heng Long 7.1. For example, lmcq11 did this with his Sherman:
viewtopic.php?t=34892
It's just a matter of modifying the connectors.

Kaczor wrote: ↑Wed Oct 29, 2025 8:39 am There shouldn't be any problems connecting the Tamiya to the Heng Long 7.1. For example, lmcq11 did this with his Sherman:
viewtopic.php?t=34892
It's just a matter of modifying the connectors.

Thank you very much for introducing me to such a wonderful job

Tamiya's motor, Canon drive unit, and speaker, all I have to do is just change the connector to the henlong 7.1 board.

For me, the big trouble is the recoil system.

I checked the wonderful work of lmcq11, he worked the fixed mount separately.

Very helpful for my work to do soon

I wish you good luck and learning with the conversion, yougho. Please do keep us informed of how the work progresses.

Herr Dr. Professor wrote: ↑Wed Oct 29, 2025 8:51 pm I wish you good luck and learning with the conversion, yougho. Please do keep us informed of how the work progresses.

There is too much information here.

Thank you