1/16 T-80BVM
Posted: Fri Oct 17, 2025 8:54 am
- IMG_20251016_235058.jpg (2.17 MiB) Viewed 462 times
- IMG_20251016_235053.jpg (1.98 MiB) Viewed 462 times
- IMG_20251016_235045.jpg (1.88 MiB) Viewed 462 times
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
1/16 T-80BVM
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=38001
Page 1 of 2
The design has been completed and is under production-
Re: 1/16 T-80BVM
Posted: Fri Oct 17, 2025 9:05 am
Thaaaaaatsssss niiiiiiice
Re: 1/16 T-80BVM
Posted: Fri Oct 17, 2025 4:03 pm
Yes, Bix is right. And what a surfeit of interesting details! I see smoke dischargers, ERA, and a stowage basket, but the rest just baffles me. On what tank's turret would this go? (I suppose a T80 
.) Is there a book somewhere that explains what all those goodies are?
.) Is there a book somewhere that explains what all those goodies are?Re: 1/16 T-80BVM
Posted: Thu Oct 23, 2025 5:55 pm
- IMG_20251024_003314.jpg (1.97 MiB) Viewed 334 times
- IMG_20251024_003307.jpg (1.77 MiB) Viewed 334 times
- IMG_20251024_003256.jpg (2.06 MiB) Viewed 334 times
- IMG_20251024_003249.jpg (2.01 MiB) Viewed 334 times
- IMG_20251024_003235.jpg (2.07 MiB) Viewed 334 times
- IMG_20251024_003227.jpg (1.74 MiB) Viewed 334 times
- IMG_20251024_003150.jpg (1.51 MiB) Viewed 334 times
- IMG_20251024_003144.jpg (1.69 MiB) Viewed 334 times
- IMG_20251024_003129.jpg (1.82 MiB) Viewed 334 times
- IMG_20251024_003122.jpg (1.71 MiB) Viewed 334 times
- IMG_20251024_003117.jpg (1.98 MiB) Viewed 334 times
- IMG_20251024_003053.jpg (1.89 MiB) Viewed 334 times
- IMG_20251021_231128.jpg (1.97 MiB) Viewed 334 times
- IMG_20251020_190012.jpg (1.77 MiB) Viewed 334 times
- IMG_20251020_161125.jpg (1.57 MiB) Viewed 334 times
Re: 1/16 T-80BVM
Posted: Thu Oct 23, 2025 7:02 pm
Stunning detail. Is this all with filament, or are the really small bits in resin?
Mike.
Mike.
Re: 1/16 T-80BVM
Posted: Thu Oct 23, 2025 7:30 pm
PETG printing, each layer is 0.1MM high.ColemanCollector wrote: ↑Thu Oct 23, 2025 7:02 pm Stunning detail. Is this all with filament, or are the really small bits in resin?
Mike.
Re: 1/16 T-80BVM
Posted: Thu Oct 23, 2025 9:32 pm
The detail is very nice. Using a .2mm nozzle?
Re: 1/16 T-80BVM
Posted: Fri Oct 24, 2025 8:18 am
Re: 1/16 T-80BVM
Posted: Mon Nov 03, 2025 1:21 pm
- IMG_20251103_203406.jpg (1.99 MiB) Viewed 141 times
- IMG_20251103_203554.jpg (1.73 MiB) Viewed 141 times
- IMG_20251103_203622.jpg (1.86 MiB) Viewed 141 times
- IMG_20251103_203632.jpg (1.61 MiB) Viewed 141 times
- IMG_20251103_203641.jpg (1.99 MiB) Viewed 141 times
- IMG_20251103_203649.jpg (1.77 MiB) Viewed 141 times
- IMG_20251103_203657.jpg (2.23 MiB) Viewed 141 times
- IMG_20251103_203704.jpg (2.18 MiB) Viewed 141 times
- IMG_20251103_203733.jpg (2.38 MiB) Viewed 141 times
- IMG_20251103_203738.jpg (2.26 MiB) Viewed 141 times
- IMG_20251103_203759.jpg (2.59 MiB) Viewed 141 times
- IMG_20251103_203912.jpg (2.01 MiB) Viewed 141 times
- IMG_20251103_203924.jpg (1.84 MiB) Viewed 141 times
- IMG_20251103_205926.jpg (2.07 MiB) Viewed 141 times
- IMG_20251103_205931.jpg (2.14 MiB) Viewed 141 times
Re: 1/16 T-80BVM
Posted: Mon Nov 03, 2025 1:23 pm