RC Tank Warfare community hobby forum

Hello everyone, following radio TX problems, which I can't find the problem with?? I'm considering replacing it? My only problem is the programming? I'm totally permeable to that, or else it must be simple!!! Minimum 6 channels? 8/10 would be great, and possible to assign certain functions on switches, for a TK 24? I had a FST 6 in the past, I use? well should I say? I'm considering Elmod (old) and Tam. So any good advice, for a very slow brain, would be welcome
Thanks in advance.

Following my request for advice on a new radio? I will explain my problem... On my Flysky TH9X flashed ER9x, wanting to program a new model? I think I made a mistake..... it started with the fact that no servo reacted to the sticks?? the RX light only lights up when the TX is running? After several restart attempts, I don't know where to put my big finger but since then despite (I think?) the screen lights up, but does not display anything?? so if you have an opinion, a solution? I'm interested!!! otherwise it will be the replacement (annoys me a little!!!) in advance thanks for your possible help.

Let me bump attention to your request, Jofaur86. You have my useless sympathy. I wish I could help, but as you know, I am slow to learn about electronics. I would like to use my FlySky i6X more, but the steps to making any change are tricky and confusing. grumble grumble, fuss fuss...

Radiomaster TX 16S MK ll. Buy one and thank me later.

Hello and thank you Jimster, I am completely overwhelmed (to my great regret) for any radio programming? I spent entire evenings trying to understand?? nothing works.... Sometimes I want to stop everything, all alone in my corner, I have no other solution but to beg on the forum??? which saddens me by the way? but hey. I will see if there are other opinions? otherwise I will return to a simpler system, have a good day.

Thank you Mr. Professor, for your moral support!!! Indeed all this is very complicated, I try to read the instructions properly, watch videos? I tell myself that it must not be difficult? Well no, my brain blocks I admire on this forum, all the members who succeed or it's age or not following the game, but hey that's how it is.

Hello, does anyone have any possible ideas to resolve my problem Try again? Still the same? As if the memory had been erased? How is this possible?

Jofaur86. Although it seems unlikely, perhaps there's a slight chance one of these could be of some help. I dug through all the URLs I have bookmarked on setting up electronics, especially my FlySky iX6. Here's what I have.


FlySky RC: https://www.flysky-cn.com/0enhome
Setting up a FlySky Transmitter: https://www.youtube.com/watch?v=kKgV3LhAwVo
Binding a FlySky receiver: https://www.youtube.com/watch?v=v5SXRkQMgkA and https://www.youtube.com/watch?v=msGpx8vEHsQ
FlySky with two motors set up: https://www.youtube.com/watch?v=sIgX9P8l8kw
Mato 2.4G Binding: https://www.youtube.com/watch?v=d--E0rEaQ_A
Setting up a Clark TK20: http://www.clark-model.com/eng/prod_rx20_tu/index.html

Good evening Her Professor, and a big thank you for your links there is one that interests me particularly ... it is true that it is a bit difficult to obtain answers? that is why I appreciate yours all the more what type of radio do you use? 6 or 8 channels? Because I'm thinking of buying a simpler one.

I use a FlySky iX6, six channel, for any AFVs or softsided vehicles in which I have put electronics (mostly Will and Catherine's WCP). I also use FlySky receivers.