FREE: you pay shipping: HL Abrams no-electronics
Posted: Sat May 18, 2024 8:24 pm
I have an "upgraded" Heng Long Abrams in NATO camouflage colors. I originally tested it with the correct hobby grease and oil, the correct amount of smoke fluid (same as all my tanks). The test run was indoors for less than five minutes--if even that much). It is mint, has been stored in its original black decorative "carry" box and outer carton, indoors in a dry heated/AC environment.
It has all of these original Heng Long parts:
all-metal tracks (not with rubber pads) and sprockets (not sure if it has roller bearings)
metal (probably zinc) gears with the common motor connectors of JST type (not immediately compatible with Heng Long 6.0, 6.0s, 7.0 or 7.1)
all the sprues of parts
battery if you want it
BBs if you want
Although included in the box, the transmitter or receiver or both seem not to be working. The original TX/RX is from 2015, so it must be a 2.4 GHz RX18.
It does not have the standard issue
half figure
This would be a great one for converting to Heng Long 7.0 0r 7.1 or good aftermarket electronics. I am simply overwhelmed with projects and have a newer Abrams anyway.
PM to Herr Dr., Professor; IT''S YOURS SO LONG AS YOU PAY THE SHIPPING
It has all of these original Heng Long parts:
all-metal tracks (not with rubber pads) and sprockets (not sure if it has roller bearings)
metal (probably zinc) gears with the common motor connectors of JST type (not immediately compatible with Heng Long 6.0, 6.0s, 7.0 or 7.1)
all the sprues of parts
battery if you want it
BBs if you want
Although included in the box, the transmitter or receiver or both seem not to be working. The original TX/RX is from 2015, so it must be a 2.4 GHz RX18.
It does not have the standard issue
half figure
This would be a great one for converting to Heng Long 7.0 0r 7.1 or good aftermarket electronics. I am simply overwhelmed with projects and have a newer Abrams anyway.
PM to Herr Dr., Professor; IT''S YOURS SO LONG AS YOU PAY THE SHIPPING