Hello Tanker,
the print files are from Cults.
There are some things that are not consistent and should be improved.
First the cannon barrel, the diameter at the end is too small.
In addition, a model with such a long barrel is difficult to transport, so the barrel should be divisible:
- Barrel.jpg (143.05 KiB) Viewed 267 times
Due to the larger diameter, the barrel no longer fits into the recoil and the guide is too short.
This is too unstable anyway and leads to a wobbly barrel:
- Barrel_Sceleton.jpg (182.36 KiB) Viewed 267 times
The motor deck needs moore details:
- Motordeck.jpg (189.41 KiB) Viewed 267 times
The rear hooks are also incorrect, as well as redrawing:
- Hook_Type3.jpg (157.41 KiB) Viewed 267 times
And if we're going to redraw everything anyway, we might as well redraw the barrel fixture as well:
- Barrel fixture.jpg (195.83 KiB) Viewed 267 times
The 3D printer has a lot to do, with an estimated printing time of around 80 hours for all the parts. But I also print everything in high resolution and detail.
The track-links are currently being printed, 70 pieces fit on the printer.... 3 passes are necessary:
- Comqueror 05042024-001.jpg (263.52 KiB) Viewed 267 times
Test fit:
- Comqueror 05042024-002.jpg (69.7 KiB) Viewed 267 times
- Comqueror 05042024-003.jpg (80.84 KiB) Viewed 267 times
That's it for today.
Thanks for watching