Renault FT 1:6
Re: Renault FT 1:6
Just noticed , looking at the pictures , that I forgot to put in the 2 sets of 3 rivets at the bottom pivot end of the skid.
- Ecam
- Warrant Officer 2nd Class
- Posts: 1447
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Renault FT 1:6
Wow, hand start. I would have thought it electric start. Somewhere around that time the electric start came into use, but I couldn't say when or where.
Yeah, I can just imagen the conversation - "you killed it, you get out"!
Yeah, I can just imagen the conversation - "you killed it, you get out"!
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
Re: Renault FT 1:6
These tanks didnt have any electrics . The ignition was by magneto. So wind over the engine and sparks come out of the plugs. No lights, so no battery or dynamo needed. Manual turret traverse and gun elevation.
Cars and motorbikes of this era were typically still using acetylene lamps, so no battery required.
The car I owned before the one I have now, that I sold 4 years ago was a 1927 Morris Cowley, also with magneto ignition. Although It did have an elctric Dynostarter and electric lights. I used to enjoy starting it with the handle. My new car (its only a mere 70 years old) by comparison feels much more modern.
I think British WW1 tanks were also hand started (from inside).
BTW, I live about 5 miles from the Ricardo factory in Shoreham UK. Who made the engines for British WW1 tanks.
They still do engine development for many major vehicle manufaturers all around the world. You see a lot of prototype cars coming and going from their site on test drives around Sussex. You can always spot them because they are vinyl wrapped in black and white "Dazzle" style camoflauge to make it harder to determine the manufacturer.
- Ecam
- Warrant Officer 2nd Class
- Posts: 1447
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Renault FT 1:6
Thinking about it the late Model T finally received electric start probably mid 20s. I had to work on a T truck for work and mom had a Model A. The two were just a couple years apart but completely different from each other. The Model A was more similar to a 60s era car than it was to the one it replaced.
Anyway, tremendous build on the FT. In my top five builds of all time!
Anyway, tremendous build on the FT. In my top five builds of all time!
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
Re: Renault FT 1:6
It was fun making the hammer today. From a bit of square steel rod.
An old paintbrush became the handle.
Here fitting the wedge:
An old paintbrush became the handle.
Here fitting the wedge:
Re: Renault FT 1:6
I dont know why they made the hammer shaft pass through the radiator grill like that. It would have been much simpler to fit it to the other side of the engine cover.
Re: Renault FT 1:6
I also added the curly horn things to the tail skid that the tow chains hook on to.
- Ecam
- Warrant Officer 2nd Class
- Posts: 1447
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Renault FT 1:6
That sledge hammer is a work of art on its own! Always fun to see your updates.
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
Re: Renault FT 1:6
I have now fitted the r/c components. I knew virtually about this subject but fortunately this video helped. Even I could understand the wiring diagram:
https://www.youtube.com/watch?v=zrGDsmdWXW8
https://www.youtube.com/watch?v=zrGDsmdWXW8
Re: Renault FT 1:6
I tideid upt the inside of the drivers compartment with some scale chequer plate