Page 1 of 1
Hello from Ft Sill Oklahoma
Posted: Tue Mar 14, 2023 4:39 am
by Adonis
New to the hobby and I have 2 tanks and Tiger 1 and Abrams being modified into a TUSK looking for tips on the electronics.
Re: Hello from Ft Sill Oklahoma
Posted: Tue Mar 14, 2023 12:26 pm
by BarryC
Welcome Sir!
You'll find several Tiger I and Abrams builds to stir your modeling juices.
I have an M1A1 Abrams with TUSK 1 that started out as a Heng Long M1A2 found here, you might find helpful.
viewtopic.php?t=18880
Barry
Re: Hello from Ft Sill Oklahoma
Posted: Tue Mar 14, 2023 12:33 pm
by Ecam
Welcome aboard. Have a daughter just north of OKC. I hear you've got a nice armor display nearby, next trip to Oklahoma, I intend to give it a look. I'm relatively weak at electrics for these and tend to use the stock ones. I have an old PzIII that needs a new running system and am considering ordering a new one to rob its system for the old tank. It looks like a complete tank is just a couple bucks more than piecing a system together (and I'd have a parts tank left over).
Re: Hello from Ft Sill Oklahoma
Posted: Tue Mar 14, 2023 4:14 pm
by MrChef
Welcome Adonis from New York.
Re: Hello from Ft Sill Oklahoma
Posted: Tue Mar 14, 2023 9:21 pm
by Herr Dr. Professor
Hmm... So Ecam has a daughter just north of Adonis... OK, I'll shut up.
https://en.wikipedia.org/wiki/Adonis
Re: Hello from Ft Sill Oklahoma
Posted: Wed Mar 15, 2023 4:14 am
by HERMAN BIX
G'day & welcome along Mr Adonis..................Daughters shall be off limits I'd say mate !
I have driven down past Ft Sill on the way out of Enid, we drove to Dallas Ft Worth instead of flying out of good ole Roy Rodgers in OKC. Got lost, got found, made the flight and saw a lot on the way!
Have fun while you are here & pictures of your projects when you can
Re: Hello from Ft Sill Oklahoma
Posted: Thu Mar 16, 2023 6:34 pm
by Meter rat
Welcome to the place of lots of knowledge from the West Coast of Scotland.
Re: Hello from Ft Sill Oklahoma
Posted: Thu Mar 16, 2023 8:39 pm
by Jimster
Welcome from Southern Illinois! I have a particular fascination with the Tiger 1. Here’s my build thread on my Initial Production Tiger if you’re interested. The electronics I’m using is an Elmod Fusion Pro which is out of production but their newer version might be satisfactory.
viewtopic.php?t=26614