RC Tank Warfare community hobby forum

Posted: **Tue Feb 28, 2023 5:04 pm**

: XTEPE[]@$MDJAEIS4}_4KGS.png (169.71 KiB) Viewed 1874 times

$XGDXV_SS%OVDAST{H`PO{R1.png$: XGDXV_SS%OVDAST{H`PO{R1.png (284.28 KiB) Viewed 1874 times

: WUB~F(C0S81_5DT6PC(3V_N.png (181.4 KiB) Viewed 1874 times

: VG~Q47IV8%Q6RN9SC}L4KTM.png (332.12 KiB) Viewed 1874 times

: D[02VU4}Z88LAJ%H2JJ2ZE4.png (523.71 KiB) Viewed 1874 times

$37_$3VGB)F@XT4JGL{LC143.png$: 37_$3VGB)F@XT4JGL{LC143.png (584.08 KiB) Viewed 1874 times

: 5O692AKW5(G)E9@3~_S06VQ.png (523.71 KiB) Viewed 1874 times

: 3UY7NVHKO_]VDP`}2ZNSVDF.png (429.26 KiB) Viewed 1874 times

: 0RMJIGWNO_0GFLW%Y$`KE_R.png (148.28 KiB) Viewed 1874 times

: `{BBIK%OE{RPU2U3MGKV~A7.png (715.96 KiB) Viewed 1874 times

: [HZ(ST1@0JGC%KCVV$Z`WLH.png (248.1 KiB) Viewed 1874 times

: [5}AMIY~2_4}`JJ65K$9%CM.png (238.22 KiB) Viewed 1874 times

I have to admit that this is a very complex and energy-consuming project，But when he is made, it will make people have an unprecedented sense of achievement

PUMA will have the following functions

1. Smoke (tail gas effect)

2. Gun flash/telescoping/pitching

3. Turret rotation

4. Walking (steering/straight)

5. Audio-visual effect

6. Recoil of artillery

Posted: **Tue Feb 28, 2023 5:10 pm**

: R}WRRO`HP3)MXHGL%I$VVVA.png (516.32 KiB) Viewed 1873 times

: O}95$LY6YR_L(RRSE}9@}U8.png (693.44 KiB) Viewed 1873 times

: ~BEV2D%}ZJ3W3H~`~$%VY~4.png (324 KiB) Viewed 1873 times

: }[LWXCH07I2Y$89RGZW%~1N.png (499.81 KiB) Viewed 1873 times

: _9H6XHDNOF0JY}P)2(X0XD7.png (654.24 KiB) Viewed 1873 times

I spent a lot of time on the walking mechanism,

For example, when turning, the angle difference between the inner tire and the outer tire, the angle difference between the first and fourth tire pairs and the second and third tire pairs

It took me a lot of time to restore the appearance of the chassis and the steering/transmission mechanism. Fortunately, the turret appearance of PUMA is very simple, and I can finish it in a short time.

This is definitely an expected model

I also need to add that the five observation windows of the car body can be opened.

Posted: **Tue Feb 28, 2023 9:30 pm**

Nice renders. I wish I had the time to learn CAD.

Derek

Posted: **Wed Mar 08, 2023 10:39 am**

: TXBE6)WLIG5E4XQ$6QV))}K.png (310.2 KiB) Viewed 1769 times

: EY8KN}@7XCEI_FHAYD3)H[S.png (141.9 KiB) Viewed 1769 times

: 68P0B)160OCGASD_CKDCBGG.png (208.43 KiB) Viewed 1769 times

: _9}(~FE6_`BGVHY@GGOX$XI.png (149.46 KiB) Viewed 1769 times

: MGOT`]SGR]GA_J~4(15JL[I.png (223.09 KiB) Viewed 1769 times

I have finished the design work,All parts have found corresponding purchase channels. I believe it will be completed soon

Posted: **Wed Mar 08, 2023 3:08 pm**

Very good design!, I will follow the thread carefully

Posted: **Wed Mar 08, 2023 10:10 pm**

Very cool. I now have so many 3D printed tank plans on my SSD at home that I don't know if I'll ever get them all built... LOL

Derek

Posted: **Thu Mar 09, 2023 2:32 am**

looks awesome, will you put this on Cults3d too?

Posted: **Fri Mar 10, 2023 8:46 am**

jee wrote: ↑Thu Mar 09, 2023 2:32 am looks awesome, will you put this on Cults3d too?

In fact, I also made T80U on Thiniverse. I will only publish some outdated designs. Obviously, this puma is my latest work, and will not release drawings in a short time

Posted: **Fri Mar 10, 2023 1:52 pm**

USSR1991 wrote: ↑Fri Mar 10, 2023 8:46 am
jee wrote: ↑Thu Mar 09, 2023 2:32 am looks awesome, will you put this on Cults3d too?

In fact, I also made T80U on Thiniverse. I will only publish some outdated designs. Obviously, this puma is my latest work, and will not release drawings in a short time

Ah, thanks, of course.
So the T-80U is yours.
I assumed the IS-3 on Cults3d was yours as it is shared under the same username as you use overhere.

Posted: **Fri Mar 10, 2023 2:21 pm**

jee wrote: ↑Fri Mar 10, 2023 1:52 pm
USSR1991 wrote: ↑Fri Mar 10, 2023 8:46 am
jee wrote: ↑Thu Mar 09, 2023 2:32 am looks awesome, will you put this on Cults3d too?

In fact, I also made T80U on Thiniverse. I will only publish some outdated designs. Obviously, this puma is my latest work, and will not release drawings in a short time
Ah, thanks, of course.
So the T-80U is yours.
I assumed the IS-3 on Cults3d was yours as it is shared under the same username as you use overhere.

I have to say that your observation is very sharp. I really released the IS - on cults

RC Tank Warfare community hobby forum

Make one 1/16 sd.kdz.234/2 PUMA

Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA

Re: Make one 1/16 sd.kdz.234/2 PUMA