Make one 1/16 sd.kdz.234/2 PUMA

[USSR1991]

XTEPE[]@$MDJAEIS4}_4KGS.png (169.71 KiB) Viewed 1053 times

XGDXV_SS%OVDAST{H`PO{R1.png (284.28 KiB) Viewed 1053 times

WUB~F(C0S81_5DT6PC(3V_N.png (181.4 KiB) Viewed 1053 times

VG~Q47IV8%Q6RN9SC}L4KTM.png (332.12 KiB) Viewed 1053 times

D[02VU4}Z88LAJ%H2JJ2ZE4.png (523.71 KiB) Viewed 1053 times

37_$3VGB)F@XT4JGL{LC143.png (584.08 KiB) Viewed 1053 times

5O692AKW5(G)E9@3~_S06VQ.png (523.71 KiB) Viewed 1053 times

3UY7NVHKO_]VDP`}2ZNSVDF.png (429.26 KiB) Viewed 1053 times

0RMJIGWNO_0GFLW%Y$`KE_R.png (148.28 KiB) Viewed 1053 times

`{BBIK%OE{RPU2U3MGKV~A7.png (715.96 KiB) Viewed 1053 times

[HZ(ST1@0JGC%KCVV$Z`WLH.png (248.1 KiB) Viewed 1053 times

[5}AMIY~2_4}`JJ65K$9%CM.png (238.22 KiB) Viewed 1053 times

I have to admit that this is a very complex and energy-consuming project，But when he is made, it will make people have an unprecedented sense of achievement

PUMA will have the following functions

1. Smoke (tail gas effect)

2. Gun flash/telescoping/pitching

3. Turret rotation

4. Walking (steering/straight)

5. Audio-visual effect

6. Recoil of artillery

[USSR1991]

R}WRRO`HP3)MXHGL%I$VVVA.png (516.32 KiB) Viewed 1052 times

O}95$LY6YR_L(RRSE}9@}U8.png (693.44 KiB) Viewed 1052 times

~BEV2D%}ZJ3W3H~`~$%VY~4.png (324 KiB) Viewed 1052 times

}[LWXCH07I2Y$89RGZW%~1N.png (499.81 KiB) Viewed 1052 times

_9H6XHDNOF0JY}P)2(X0XD7.png (654.24 KiB) Viewed 1052 times

I spent a lot of time on the walking mechanism,

For example, when turning, the angle difference between the inner tire and the outer tire, the angle difference between the first and fourth tire pairs and the second and third tire pairs

It took me a lot of time to restore the appearance of the chassis and the steering/transmission mechanism. Fortunately, the turret appearance of PUMA is very simple, and I can finish it in a short time.

This is definitely an expected model

I also need to add that the five observation windows of the car body can be opened.

[tankme]

Nice renders. I wish I had the time to learn CAD.

Derek

[USSR1991]

TXBE6)WLIG5E4XQ$6QV))}K.png (310.2 KiB) Viewed 948 times

EY8KN}@7XCEI_FHAYD3)H[S.png (141.9 KiB) Viewed 948 times

68P0B)160OCGASD_CKDCBGG.png (208.43 KiB) Viewed 948 times

_9}(~FE6_`BGVHY@GGOX$XI.png (149.46 KiB) Viewed 948 times

MGOT`]SGR]GA_J~4(15JL[I.png (223.09 KiB) Viewed 948 times

I have finished the design work,All parts have found corresponding purchase channels. I believe it will be completed soon

[Edumardo]

Very good design!, I will follow the thread carefully

[tankme]

Very cool. I now have so many 3D printed tank plans on my SSD at home that I don't know if I'll ever get them all built... LOL

Derek

[jee]

looks awesome, will you put this on Cults3d too?

[USSR1991]

looks awesome, will you put this on Cults3d too?

In fact, I also made T80U on Thiniverse. I will only publish some outdated designs. Obviously, this puma is my latest work, and will not release drawings in a short time

[jee]

looks awesome, will you put this on Cults3d too?

In fact, I also made T80U on Thiniverse. I will only publish some outdated designs. Obviously, this puma is my latest work, and will not release drawings in a short time

Ah, thanks, of course.
So the T-80U is yours.
I assumed the IS-3 on Cults3d was yours as it is shared under the same username as you use overhere.

[USSR1991]

looks awesome, will you put this on Cults3d too?

In fact, I also made T80U on Thiniverse. I will only publish some outdated designs. Obviously, this puma is my latest work, and will not release drawings in a short time

Ah, thanks, of course.
So the T-80U is yours.
I assumed the IS-3 on Cults3d was yours as it is shared under the same username as you use overhere.

I have to say that your observation is very sharp. I really released the IS - on cults