Transformation of the King Tiger II into an Infrared combat version

Fixes and mods for the Matorro King Tiger
papyrox
Recruit
Posts: 18
Joined: Sat Jan 14, 2023 10:44 am
Location: Belgique

Transformation of the King Tiger II into an Infrared combat version

Post by papyrox »

Bonjour tous,

Désolé si j'utilise le français, mais mon anglais est quasi nul ;)

Je possède un King Tiger II et je souhaiterais le transformer pour l'adapter au combat Infrarouge.

Cela fait plusieurs jours que je suis sur le sujet et autant vous dire que je ne m'y retrouve pas dans ce mélange pour poules :headbang:

Chaque fois que je fais un pas en avant, je me retrouve confronté à un questionnement.

J'espère pouvoir bénéficier de votre aide pour parvenir à mes fins.

Tout d'abord, sachant que j'ai acheté le tank d'occasion à un ami, voici l'étiquette que j'ai sur la boîte de rangement : (rien ne dit que le tank qui se trouve à l'intérieur correspond à cette étiquette)
Image

Mon but étant de migrer vers cette version :
Image

En fait, la question est simple, que dois-je acheter pour réaliser cette transformation ?

Au fil des postes qui vont suivre, je vais essayer de vous communiquer le résultat de mes recherches. Et j'espère que ce cheminement en aidera plus d'un qui se posent les mêmes questions.
Why make it simple when there is a way to make it complicated.
Jofaur86
Warrant Officer 1st Class
Posts: 1665
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Transformation of the King Tiger II into an Infrared combat version

Post by Jofaur86 »

Hello Papyrox, welcome to this great forum :thumbup: According to your photos, is this a KT from Torro? so to switch it to infra red combat mode? you already need to know the type of electronic board inside the tank? a photo would be :) welcome
papyrox
Recruit
Posts: 18
Joined: Sat Jan 14, 2023 10:44 am
Location: Belgique

Re: Transformation of the King Tiger II into an Infrared combat version

Post by papyrox »

Voici ce que j'ai trouvé sur le schéma de câblage qui se rapproche le plus de ma version actuelle:
Image
Sur ce schéma, la carte mère est une Taigen 1 (si je ne me trompe pas)

Sur mon tank, c'est la version 2 ou 3. Comment faire pour le savoir ?
Et cela a-t 'il de l'importance dans le cadre de cette transformation ?
Image

Edit: Bonjour Jofaur86, je n'avais pas vu ton message. Merci pour ton intervention... :thumbup:
Why make it simple when there is a way to make it complicated.
papyrox
Recruit
Posts: 18
Joined: Sat Jan 14, 2023 10:44 am
Location: Belgique

Re: Transformation of the King Tiger II into an Infrared combat version

Post by papyrox »

Voici ce qui se rapproche le plus de ma version actuelle
Image
Why make it simple when there is a way to make it complicated.
papyrox
Recruit
Posts: 18
Joined: Sat Jan 14, 2023 10:44 am
Location: Belgique

Re: Transformation of the King Tiger II into an Infrared combat version

Post by papyrox »

Juste 5 fils passent dans la tourelle et la LED barrée n'est pas présente
Image
Why make it simple when there is a way to make it complicated.
papyrox
Recruit
Posts: 18
Joined: Sat Jan 14, 2023 10:44 am
Location: Belgique

Re: Transformation of the King Tiger II into an Infrared combat version

Post by papyrox »

Ici, les deux schémas pour la transformation Infrarouge:
Image

Image
Why make it simple when there is a way to make it complicated.
Jofaur86
Warrant Officer 1st Class
Posts: 1665
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Transformation of the King Tiger II into an Infrared combat version

Post by Jofaur86 »

do you need this, at RC Tank.de or other suppliers? depending on where you are
https://www.rctank.de/V2-V3-Infrared-ba ... -Taigen-HL
Your diagrams are represented with the Asiatam recoil and elevation system, and not BB firing, for this you must replace the BB firing mechanism with Asiatam (RC Tank.de) you will need to replace the barrel and certain parts
you also need this, net there you will have everything you need, to make you happy. Please note, this system only works with another Idem and not with Tamiya for example
https://www.rctank.de/Tigre-I-Unite-de- ... n-en-metal
papyrox
Recruit
Posts: 18
Joined: Sat Jan 14, 2023 10:44 am
Location: Belgique

Re: Transformation of the King Tiger II into an Infrared combat version

Post by papyrox »

Image

L'ensemble Infrarouge Récepteur et émetteur (1) s'achètent sans problème.
Le passe fils (4) je ne sais pas le quel acheter, et en plus il faut faire attention car pas compatible avec la version HL4 ???
Un nouveau circuit imprimé qui supporte les nouvelles et anciennes connexions (1.1) est-il fourni avec (1) ou (4) ?

En supposant que la carte mère est la bonne version (3) il ne restera plus qu'à placer la connexion (2) au bon endroit.

Qu'en pensez-vous ?
Why make it simple when there is a way to make it complicated.
papyrox
Recruit
Posts: 18
Joined: Sat Jan 14, 2023 10:44 am
Location: Belgique

Re: Transformation of the King Tiger II into an Infrared combat version

Post by papyrox »

Jofaur86 wrote: Sat Jan 14, 2023 1:33 pm
Your diagrams are represented with the Asiatam recoil and elevation system, and not BB firing, for this you must replace the BB firing mechanism with Asiatam (RC Tank.de) you will need to replace the barrel and certain parts
Attention qu'une partie seulement du diagramme m'intéresse.

Merci pour votre réponse, mais pouvez vous m'expliquer pourquoi je dois changer mon système de tir actuel.
Je ne comprends pas ce que cela va changer entre l'ancien et le nouveau système.
Je lis souvent que le système de recul est à proscrire lors de l'utilisation de l'infrarouge, pourquoi ?
Ne peut-on utiliser le tir de billes et l'infrarouge en même temps ?
Why make it simple when there is a way to make it complicated.
Jofaur86
Warrant Officer 1st Class
Posts: 1665
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Transformation of the King Tiger II into an Infrared combat version

Post by Jofaur86 »

The Airsoft type BB system does not have a barrel recoil, so if you wish you had something better, you have to replace this thing (crappy) in addition the Asiatam comes complete with the barrel flash, and all the necessary wiring. As far as the personal grommet (4) is concerned, I don't use any, because all the cables have to be modified, and it's only intended for 360° turret rotation, and expensive for the utility ? then it's up to you.

Warning,
Pour des raisons connues de Taigen, leur système I/R n'est PAS compatible avec la norme Tamiya et il ne fonctionnera PAS avec un réservoir non Taigen, y compris Heng Long.
Le système Heng Long i/r, s'il n'est pas modifié, n'est pas recommandé en tant que combattant valable contre un réservoir équipé de Tamiya i/r approprié ou
Post Reply

Return to “Matorro King Tiger”