Page 1 of 1
Esc sur Elmod
Posted: Fri Dec 23, 2022 6:57 pm
by Jofaur86
Good evening, a question about elmod, please, how to add 2 Esc on an Elmod card? is the board that manages the Esc or do you need two additional channels? thank you in advance, and Merry Christmas to all
this in the case of the use of more powerful motors?
Re: Esc sur Elmod
Posted: Mon Dec 26, 2022 8:01 pm
by MITCH
It is the board that manages the esc, I recommend a double esc type " sabertooth" that is suitable for tanks
Re: Esc sur Elmod
Posted: Tue Dec 27, 2022 7:09 am
by jhamm
Hi,
the old Elmod Fusion ECO/PRO had dedicated connections for external ESC.
This is no longer the case with the Fusion X.
Here you need v-cables or two additional Channels.
Re: Esc sur Elmod
Posted: Tue Dec 27, 2022 10:45 am
by Jofaur86
Bonjour,et merci à vous pour la réponse,ma carte ėtant ancienne ,Tintank Pro II avec Blaster IV, je vais voir si possible
Bonne semaine à vous
Re: Esc sur Elmod
Posted: Tue Dec 27, 2022 1:18 pm
by MITCH
It was the "pro flex" versions that managed external esc. If this is not the case with your board, you will have to do a bypass from the receiver