RC Tank Warfare community hobby forum

Hi everyone, I’m looking for some help with a project for a friend. He has a Henglong KV-1 bb which now has Taigen V3 electronics and wants me to fit a Taigen elevation/recoil unit in place of the bb. I’m just not sure where abouts the elevation/recoil unit screws to the underside of the top of the turret. So, I was wondering if anyone had any pictures of the inside of a Taigen KV-1 turret ? I can’t find any on the internet.
Any help would be greatly appreciated.
Cheers AK

PS , moderators please move this post if it is in the wrong area.


Sent from my iPhone using Tapatalk

I'm 99% sure that Taigen KV-1 used the same turret as Heng Long and it was sold only in BB version.

I agree with Kaczor: none of the KV-1s I have, HengLong or Taigen, is fitted with a recoil unit. Of course, fitting one in might be possible and not too difficult.

The taigen kv1 also came as an IR version with recoil guy's, here is a link to it on forgebear site

https://www.forgebeartanks.com/store/p1 ... Tank_.html

Cheers,Lee.

My KV-1E turret had a BB unit installed in it originally as it was a really old version of the KV-1E (FM transmitter), but I believe I've cut all the stand offs/mounting points out. I have pulled out all the Taigen recoil units I've had and replaced them with servo units so I'll probably not be of much help.

an Asiatam recoil does not fit in the turret of a KV? so here are some pictures of the solution by modifying the BB airsoft system, by servos, if can help?