M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

[lmcq11]

Front view of the TOW launcher

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture21a.JPG (119.68 KiB) Viewed 862 times

The raising mechanism is excellent. The cover is handled like the real thing. I need to put on some structure inside as it is currently empty.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture21b.JPG (101.54 KiB) Viewed 862 times

Overview of the model as it stands today. Next step is to create the M3A3 rear top hatch to replace the M2A3 hatch coming with the kit, and finalize the installation of the electronics.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture22.JPG (293.9 KiB) Viewed 862 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture22b.JPG (260.25 KiB) Viewed 862 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture22c.JPG (164.39 KiB) Viewed 862 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture23.JPG (120.44 KiB) Viewed 862 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture24a.JPG (155.41 KiB) Viewed 862 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture25.JPG (152.53 KiB) Viewed 862 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture25a.JPG (120.34 KiB) Viewed 862 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture26.JPG (249.3 KiB) Viewed 862 times

Merry Christmas everybody !!

Louis

[Ecam]

Now that is the definition of applique armor. And I thought the Lee and Grants had a bunch of rivets!

Great work so far. Merry Christmas!

[Herr Dr. Professor]

This proves that the microwave is for more than just snacks: it's a forge! Great work!

[HERMAN BIX]

The Bradley has nothing on the A7V for bolt heads

[lmcq11]

Happy new year !

Thank you for you interest.

The following two posts are for the M3A3 Bradley CFV rear top hatch.


The M3A3 CFV has a totally different rear top hatch than other M2 IFV and M3 CFV versions. It is very difficult to find pictures of it. Being on top, photographers are not able to see or picture the hatch without climbing on the vehicle, something that very few people dare to do. Some pictures i have found were unclear and there even seems to be variations of it. Here we can see an M3A3 hatch with its 4 periscopes and add-on armor.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture.JPG (92.66 KiB) Viewed 783 times

Do to the lack of available photographic evidences, i had to rely entirely on the Meng 1/35 M3A3 CFV model kit for reference on shapes and dimensions. The hatch has a complicated design, has rounded corners and lots of angles. Shown here next to the kit simpler M2A3 IFV hatch, which is too small by the way.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture2.JPG (247.33 KiB) Viewed 783 times

View of the inside of the hatch.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture3.JPG (173.57 KiB) Viewed 783 times

I started the scratch building by drawing a template and cut some parts. It is also important to dry fit it with the hull in order to adjust whatever need to be adjusted to fit the vehicle.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture4.JPG (358.49 KiB) Viewed 783 times

Telescopic scratch building of the basic shapes, starting at the bottom and going up.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture5.JPG (312.11 KiB) Viewed 783 times

Progressing. The hatch is built in 1.5mm plasticard which allows for the corners to be rounded later.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture6.JPG (261.69 KiB) Viewed 783 times

Slowly getting there. Its not perfect of course, but close enough to the original design.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture7.JPG (319.1 KiB) Viewed 783 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture8.JPG (385.81 KiB) Viewed 783 times

I used to be scared of creating periscope. What's available on the market, mainly WW2 periscopes, are never of the right dimensions. Periscopes core are easily created in 4mm thick plasticard, shaped with a nail file and augmented by a thin plasticard sheet for the guards.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture9.JPG (137.66 KiB) Viewed 783 times

Here, the hatch is getting close to completion. There are a few differences here and there with the Meng kit design, but this is the closest i could do with the time i wanted to spend on it, more or less 10 hours in total.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture10.JPG (292.94 KiB) Viewed 783 times

Continuing on following post

[tankme]

I applaud your attention to detail. Pieces like that hatch are a royal pain to build.

[lmcq11]

View of the Meng kit 1/35 hatch with the bolted raised add-on armor plates. Notice the anti-skid surface.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture11.JPG (151.69 KiB) Viewed 780 times

Complex design again.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture12.JPG (154.87 KiB) Viewed 780 times

The completed scratch built 1/16 M3A3 with the add-on armor.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture13.JPG (197.31 KiB) Viewed 780 times

It is only once the part will have been primed with an enamel primer that all the scrathes and holes can be seen, and the part finetuned. The brass bolts are removable so that the anti-skid paste can be applied later. Experts will notice that i have reused the OKMO M2 hinges for the M3. I should have created new ones but decided to reuse the M2 hinges for simplicity, and matching the hinge base on the hull. The real M3 hinges are similar but positioned a bit differently.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture14.JPG (208.41 KiB) Viewed 780 times

The inside of the hatch was given periscopes and the handle.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture15.JPG (230.91 KiB) Viewed 780 times

View of the M3A3 CFV rear hatch temporarily mounted on the chassis using a brass rod.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture16.JPG (126.25 KiB) Viewed 780 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture17.JPG (130.87 KiB) Viewed 780 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture18.JPG (112.25 KiB) Viewed 780 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture19.JPG (123.37 KiB) Viewed 780 times

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture20.JPG (97.93 KiB) Viewed 780 times

[lmcq11]

I applaud your attention to detail. Pieces like that hatch are a royal pain to build.

Yeah it was... thanks

And here is a picture of the M3A3 CFV model as it stands today.

M3A3 Bradley US Cavalry Fighting Vehicle - RC 1/16 Build

Capture21.JPG (219.09 KiB) Viewed 780 times

Regards, Louis

[Kaczor]

Looking sharp

[PainlessWolf]

Louis,
Happy New Years! All of the Sub Assemblies are Mini Kits and usually Scratch Built by you. Beautiful work and celestial attention to Detail. Following along!

regards,
Painless