Page 1 of 1

Rotation Servo replacement

Posted: Fri Nov 18, 2022 12:03 pm
by Albert
Hi
I have a Heng Long 1/16 Tiger 1. Unfortunately one of the teeth on the turret rotation Servo/motor is broken. This means that the turret will stick and I have to give it a gentle nudge to free it. It appears to be a sealed unit which I don't fancy trying to open, even if I could make a new tooth. Does anyone either have one I could buy, or know no where I can get one. It is the little box about one and a half inches square (ish), not the big gear that is fixed to the turret.

Re: Rotation Servo replacement

Posted: Fri Nov 18, 2022 12:12 pm
by Tiger6
Forgebear is your best bet

Re: Rotation Servo replacement

Posted: Fri Nov 18, 2022 12:15 pm
by Model Builder 4
Hi Albert,

As Tiger6 mentioned forgebear is your best bet if you are in the UK, here is a link for it

https://www.forgebeartanks.com/store/p1 ... _Tank.html

Hope this helps :thumbup:

Cheers,Lee.

Sent from my SM-G950F using Tapatalk

Re: Rotation Servo replacement

Posted: Fri Nov 18, 2022 12:27 pm
by Albert
Doh! Of course. It's now on order. Foolish boy.