1/14 Heavy Haulage Tower for Semi truck
Posted: Wed Apr 13, 2022 8:57 pm
Some pictures of some other parts we have made for some Tamiya trucks when we have been asked for a heavy haulage tower
We are also using one on a Bruder 8x8 truck conversion
The Lower box (fuel tank)can be sealed with electronics, or i like to leave the end cap off so a battery can be fitted
The side panel is held in place with pins and magnets
The wide fan can be fitted with laptop fan and run and make the noise of a fan if required
Fits with adaptors into tamiya chassis or other chassis rails upon request
Looks quite neat and is a simple upgrade for that heavy haulage truck if thats what you are after
We are also using one on a Bruder 8x8 truck conversion
The Lower box (fuel tank)can be sealed with electronics, or i like to leave the end cap off so a battery can be fitted
The side panel is held in place with pins and magnets
The wide fan can be fitted with laptop fan and run and make the noise of a fan if required
Fits with adaptors into tamiya chassis or other chassis rails upon request
Looks quite neat and is a simple upgrade for that heavy haulage truck if thats what you are after