Heng Long gearboxes on Aliexpress like the DKLM PDGBS
Posted: Sat Feb 12, 2022 5:33 am
Wasn't really sure where to post this, but I ran across what I felt was a deal. The DKLM RC gearboxes were running around $140 US when they were available from them. We know that Heng Long started selling these as "dual current gearboxes"...whatever that means. Since the pandemic, the prices of these gearboxes have skyrocketed from what I've seen. So when I was AliExpress the other day I saw these for sale:
https://www.aliexpress.com/item/1005002 ... 4c4dCELI19
Now they are the L65 ("L" for low motor mount and 65 for 65mm shaft length). They are suitable for the ZTZ tanks, the T90, and the T72 according to the listing as they are the "fast" version. The shipping price is HIGH, but even with shipping it puts each unit at right around $112 each for me. You can also change the shipping options to bring it down some. I know most WW2 tanks would need the slower version, but I thought to my self that 65mm is the longest shaft you will every need for a stock HL tank. You can always make a shaft shorter, but you can't make it longer. Cut the sprocket shaft on the gearbox end shorter, grind a new flat to fit into the gear, and you can fit these to any tank that needs the faster gearbox.
The other versions of this gearbox on AliExpress are a lot more expensive than this version so the same "deal" cannot be had with them. They start at $150 and add shipping to those also. I bought a few for some upcoming projects as the price was the same I was paying for the HL CNC sealed gearboxes I've been using.
https://www.aliexpress.com/item/1005002 ... 4c4dCELI19
Now they are the L65 ("L" for low motor mount and 65 for 65mm shaft length). They are suitable for the ZTZ tanks, the T90, and the T72 according to the listing as they are the "fast" version. The shipping price is HIGH, but even with shipping it puts each unit at right around $112 each for me. You can also change the shipping options to bring it down some. I know most WW2 tanks would need the slower version, but I thought to my self that 65mm is the longest shaft you will every need for a stock HL tank. You can always make a shaft shorter, but you can't make it longer. Cut the sprocket shaft on the gearbox end shorter, grind a new flat to fit into the gear, and you can fit these to any tank that needs the faster gearbox.
The other versions of this gearbox on AliExpress are a lot more expensive than this version so the same "deal" cannot be had with them. They start at $150 and add shipping to those also. I bought a few for some upcoming projects as the price was the same I was paying for the HL CNC sealed gearboxes I've been using.