New El-mod software update coming
Posted: Fri Aug 28, 2009 5:31 am
Hi El-mod users
El-mod will within the next 14 days release a software update (chip exchange) to their Panzer Module. One of the major changes, is that acceleration is much faster than before. Some of us have had that "problem", forsing us to run in "fun mode"
cheers
Steen
Translated text below
"A larger software update for the tank engine is in the Anmarsch The last tests are conducted at the moment. I think that up to 2 weeks (sooner rather) it is so far. Here are the most important changes:
-Recognize the diagonals in 4 channel mode has been redesigned. It works now more reliable.
Spin turn has been redesigned. The tanks performs now only spin turn that if the tanks previously has been and the right lever in neutral position. It is not possible for slow, narrow curves accidentally triggering spin turn.
-Acceleration has been increased for all profiles.
More the Configurator parameters can be set:
-Adjustable for both servos in now: servo away reversal, speed, trail limit. This applies to all servo functions (pages/Höreh direction and RRZ)
Spin turn speed is adjustable
-Kettenquitschen is can be turned off, or it is possible, specify the driving level, to hear the Kettenquitschen is (only with Blaster software going 1.07 which demnächt).
-the speed of gun-Hebens/Senkens (via motor) is adjustable in seven stages.
Menu structure has been redesigned (there are now five menus: driving parameters, functions, servos, sound, parameters).
__________________
Regards,
Darky
El-mod will within the next 14 days release a software update (chip exchange) to their Panzer Module. One of the major changes, is that acceleration is much faster than before. Some of us have had that "problem", forsing us to run in "fun mode"
cheers
Steen
Translated text below
"A larger software update for the tank engine is in the Anmarsch The last tests are conducted at the moment. I think that up to 2 weeks (sooner rather) it is so far. Here are the most important changes:
-Recognize the diagonals in 4 channel mode has been redesigned. It works now more reliable.
Spin turn has been redesigned. The tanks performs now only spin turn that if the tanks previously has been and the right lever in neutral position. It is not possible for slow, narrow curves accidentally triggering spin turn.
-Acceleration has been increased for all profiles.
More the Configurator parameters can be set:
-Adjustable for both servos in now: servo away reversal, speed, trail limit. This applies to all servo functions (pages/Höreh direction and RRZ)
Spin turn speed is adjustable
-Kettenquitschen is can be turned off, or it is possible, specify the driving level, to hear the Kettenquitschen is (only with Blaster software going 1.07 which demnächt).
-the speed of gun-Hebens/Senkens (via motor) is adjustable in seven stages.
Menu structure has been redesigned (there are now five menus: driving parameters, functions, servos, sound, parameters).
__________________
Regards,
Darky