3D printed 1/16 Cromwell - RC kit by Warprints
Posted: Sun Oct 03, 2021 6:33 pm
3D printed 1/16 Cromwell - RC kit by Warprints
Full kit, printed with high quality ASA and PET(G) - NO PLA!!!
Detailed parts printed with resin.
Total weight of plastic parts is more than 1,2kg (2,6lbs).
Weight of the assembled vehicle is about 2,3 - 2,5kg (5lbs).
Printed in top configuration.
You can see more pictures of the 3D printed parts here:
https://photos.app.goo.gl/aChw9dGeYakCoLkd7
- 3 functional headlights
- possibility to use four different types of motor for turret rotation
- possibility of connecting a smoke generator to the exhaust
- built-in track tensioners
- working and adjustable suspensions
- cannon equipped with servos for recoil and aiming.
- all hatches on the model are openable.A total of 23 different hatches and covers.
- the rims of the drive wheels printed from flexible material.
- preparation for FPV camera in the driver’s hatch.
Complete hardware package is available for this kit.
There is 500 screws and nuts, 58 bearings and lot of other parts in this hardware package.
You can see list of materials in the Assembly Guide (pages 7 and 8 )
https://www.dropbox.com/s/wavihix2vogaj ... N.pdf?dl=0
Pictures of the assembled vehicle:
https://photos.app.goo.gl/fr2BHi2JR1H7VtJi9
Here are videos with the assembled vehicle:
https://www.youtube.com/channel/UCrPkWa ... syRlNINszw
Price of the 3D printed parts: 380€
Price of the hardware (including motors): 152€
+ shipping
Full kit, printed with high quality ASA and PET(G) - NO PLA!!!
Detailed parts printed with resin.
Total weight of plastic parts is more than 1,2kg (2,6lbs).
Weight of the assembled vehicle is about 2,3 - 2,5kg (5lbs).
Printed in top configuration.
You can see more pictures of the 3D printed parts here:
https://photos.app.goo.gl/aChw9dGeYakCoLkd7
- 3 functional headlights
- possibility to use four different types of motor for turret rotation
- possibility of connecting a smoke generator to the exhaust
- built-in track tensioners
- working and adjustable suspensions
- cannon equipped with servos for recoil and aiming.
- all hatches on the model are openable.A total of 23 different hatches and covers.
- the rims of the drive wheels printed from flexible material.
- preparation for FPV camera in the driver’s hatch.
Complete hardware package is available for this kit.
There is 500 screws and nuts, 58 bearings and lot of other parts in this hardware package.
You can see list of materials in the Assembly Guide (pages 7 and 8 )
https://www.dropbox.com/s/wavihix2vogaj ... N.pdf?dl=0
Pictures of the assembled vehicle:
https://photos.app.goo.gl/fr2BHi2JR1H7VtJi9
Here are videos with the assembled vehicle:
https://www.youtube.com/channel/UCrPkWa ... syRlNINszw
Price of the 3D printed parts: 380€
Price of the hardware (including motors): 152€
+ shipping
- IMG_20211003_160609.jpg (98.48 KiB) Viewed 793 times