RC Tank Warfare community hobby forum

I cant find turn on/off switch or st button in mine T90(7.0) from heng long.. in instruction these should be in bottom side but looks like they not adding them there anymore, I dont know how to turn on my tenk cuz manual is for older level and there is writen that these switches are in bottom side

It'll be there somewhere. Do any hatches open to reveal a switch? If all else fails, remove the top from the hull and trace the wires back to the switch connections.

Sent from my ASUS_X00TDB using Tapatalk

When I was unboxing my brand new Heng Long Challenger 2 the other day a small piece of paper was in with the instruction booklet and that had a revised instruction on how to switch on the Tank,
If yours is new I suggest you root through the packaging to see if your Tank has such revised instructions.

Hello,

hello, I don't know this type of tank, but found this video on the net seems to me there may be the solution to your worries
https://m.youtube.com/watch?v=Z19QqRGs0kA&t=54s

Jofaur86 wrote: Hello,

hello, I don't know this type of tank, but found this video on the net seems to me there may be the solution to your worries
https://m.youtube.com/watch?v=Z19QqRGs0kA&t=54s

That's older version unfortunately.

ah sorry, so as it said above, you just have to open the tank and follow the wiring, usually the inter-general is always on the lower frame, question of ease and logic
possible to have photo under the frame? exterior view ....

so I took screwdriver and when i wanted unscrew the first screw ... I noticed this, jesus im so blind idiot...

anyway thanks for efford guys

but its still not working

Have you charged the battery and have you sat down with the instructions for 20 minutes, The latest Heng Long Tanks control board and functions are a little more complicated than the earlier ones.