General Tank Electrics Questions
Posted: Mon Jul 26, 2021 11:13 am
Good morning,
Sorry for so many newbie questions about my Torro Pro King Tiger, I'll try to make them short, so here goes:
I'm in the process of strengthening the hull and deck of my new Torro Pro King Tiger and also replacing the electrics with an IBU2U Full and using a FlySky receiver with it, GI smoker and a decent speaker. So far so good.
1 - Is it acceptable / safe / wise to charge the 4600mah NiMh battery I have whilst it is in situ?
The reason for asking is that I have bought myself a decent charger with a large Tamiya battery plug and was wondering that if I were to make up a lead with a jack plug at one end and a large Tamiya battery socket at the other, whether it would be OK to charge the battery that way using the tank's built in charging socket?
2 - The main gun flash is very very bright. Looking on YouTube etc. it looks as though the majority of gun flashes are red / orange in colour and not bright white. Is it OK to put a small amount of red/ orange acrylic paint on the bulb to tone the flash down? Obviously waiting a decent length of time to allow the paint to dry.
3 - As the King Tiger has a metal turret, is it possible to run the gun recoil and elevation run off servos? If so, what do I need and how do I go about doing it?
Thank you.
Sorry for so many newbie questions about my Torro Pro King Tiger, I'll try to make them short, so here goes:
I'm in the process of strengthening the hull and deck of my new Torro Pro King Tiger and also replacing the electrics with an IBU2U Full and using a FlySky receiver with it, GI smoker and a decent speaker. So far so good.
1 - Is it acceptable / safe / wise to charge the 4600mah NiMh battery I have whilst it is in situ?
The reason for asking is that I have bought myself a decent charger with a large Tamiya battery plug and was wondering that if I were to make up a lead with a jack plug at one end and a large Tamiya battery socket at the other, whether it would be OK to charge the battery that way using the tank's built in charging socket?
2 - The main gun flash is very very bright. Looking on YouTube etc. it looks as though the majority of gun flashes are red / orange in colour and not bright white. Is it OK to put a small amount of red/ orange acrylic paint on the bulb to tone the flash down? Obviously waiting a decent length of time to allow the paint to dry.
3 - As the King Tiger has a metal turret, is it possible to run the gun recoil and elevation run off servos? If so, what do I need and how do I go about doing it?
Thank you.