Page 11 of 12
Re: King Tiger (henschell)
Posted: Tue Aug 31, 2021 9:16 am
by Jofaur86
For info (for KT Tamiya, but must adapt?) But not currently available
https://www.axels-modellbau-shop.de/kat ... -1-16.html
Available here, specific to Torro, Taigen, etc.
https://www.rctank.de/Tigre-Royal-Mirroir-r-angles
Re: King Tiger (henschell)
Posted: Tue Aug 31, 2021 9:26 am
by Jofaur86
For info (for KT Tamiya, but must adapt?) But not currently available
https://www.axels-modellbau-shop.de/kat ... -1-16.html
Available here, specific to Torro, Taigen, etc.
https://www.rctank.de/Tigre-Royal-Mirroir-r-angles
Re: King Tiger (henschell)
Posted: Tue Aug 31, 2021 11:01 am
by NAB
Ive been using a CD, Dremel and milliput. Will post pics once I'm happy with it
Sent from my KB2003 using Tapatalk
Re: King Tiger (henschell)
Posted: Tue Aug 31, 2021 12:55 pm
by Jofaur86
Sorry to have posted 2 times, my fingers too big ?? without doubts
OK, hadn't that thought about it? thanks for the tip
Re: King Tiger (henschell)
Posted: Tue Aug 31, 2021 7:09 pm
by NAB
Ok I've finished 2 prototypes but one has cracked so not sure I will use it.
Sent from my KB2003 using Tapatalk
Re: King Tiger (henschell)
Posted: Tue Aug 31, 2021 7:31 pm
by NAB
Also Im definitely not doing 7 smaller ones for the commanders hatch so need to think of a better option!
I might just leave them all for now and see what other options I have
Sent from my KB2003 using Tapatalk
Re: King Tiger (henschell)
Posted: Tue Aug 31, 2021 11:18 pm
by PainlessWolf
Re: King Tiger (henschell)
Posted: Wed Sep 01, 2021 4:32 am
by Herr Dr. Professor
…lots of other goodies on that Shapeways page! Thanks for the URL.
Re: King Tiger (henschell)
Posted: Wed Sep 01, 2021 5:55 pm
by NAB
The shapeways link doesn't specify if they fit all the hatches including commanders
Sent from my KB2003 using Tapatalk
Re: King Tiger (henschell)
Posted: Wed Sep 01, 2021 6:54 pm
by Jofaur86
NAB wrote:The shapeways link doesn't specify if they fit all the hatches including commanders
Sent from my KB2003 using Tapatalk
these are the periscopes for the turret, 7 on the tank commander and the eighth on the inclined side, in front of the hatch
on the other hand seems identical dimensions? so for that of the inclined side, it will have to be done? either fill around ... on the link of RC Tank.de you will notice, that it is bigger
1: Turret commander
2: Turret in front of the hatch
3: In front of hatches, radio and driver, above front glazed
- E8482D4E-BFA3-411E-8CA7-A44633EC73D7.jpeg (18.07 KiB) Viewed 1696 times