RC Tank Warfare community hobby forum

A quick question- is it possible to dial down the recoil? I have a Panzer III that leaps like a frightened rabbit when the main armament fires!!
Thank you!

no need mako for it to stop the recoil

john1970 wrote:no need mako for it to stop the recoil

Sorry?

quick question quick answer ?

the 5.3 you cant adjust the recoil action if you fit a mako board you can cut it out

Ok John, understood, I can't adjust the recoil! My option would be to change an HL 6.0 but of course I'd have a lot of plugs to rewire! Mako? Must enquire about that,
Thanks

http://rctanksaustralia.com/store/

Mako unit.

You do the reading and the ordering if you want it, I will help get it to you.
Other than one of these, you are stuck with the track recoil without a new style of board.

HERMAN BIX wrote:http://rctanksaustralia.com/store/

Mako unit.

You do the reading and the ordering if you want it, I will help get it to you.
Other than one of these, you are stuck with the track recoil without a new style of board.

Thank you Herman. I had a look last night for Mako and saw something that cost around $60. If thats it then its cheaper to fit a more recent HL MFU! You would think that there would be a wire you could cut that sends the recoil signal, but if there was then it would have been the stock answer!!

Hello,
was on the Australian Forum, at one time a scheme to carry out this with a relay? maybe Herman knows him? otherwise on rcuniverse there is this link below
https://www.rcuniverse.com/forum/rc-tan ... ost8102396
see rctankaustralian forum, ilny has a tutorial ... electronic post, but more pictures

Forum rc tank Australia,link
http://www.rctanksaustralia.com/forum/v ... ?f=82&t=19

Unfortunately Jofaur86 thats all to do with the RX-18 MFU - thank God I don't have that!! The 5.3 is okay apart from poor engine sound and athletic recoil! The easy answer would be a 6.0 MFU!