RC Tank Warfare community hobby forum

After some tech help and couldn't find a sub forum .

Can I bind an Aux channel to throttle channel to make a tank turn I have read this https://www.google.com/search?q=DIFFERE ... O82rjQCg15 and I can do it but would I have reverse with a heli radio. This is what I'm trying to emulate https://www.3dprintedtanks.com/zapojeni/ or should I just buy an open source radio/receiver or a car car type radio/receiver ?
any help appreciated.

An open source radio is the way to go. With it you will start really enjoying the hobby.

Thanks RAD , I believe I will be able to use 2 channels on the DX6i/AR7200BX to get all the movements I want but need help to figure it out is all.
If I could afford an Open TX system I'd be all over it. I am using a radio from a Helo I don't fly anymore to keep the costs down. I am a pensioner and costs are the issue.
Thank you your site is amazing. .

My plan is this or similar to use the Ar7200BX through throttle and elevator then ESC's to drive the tank.
Any help appreciated.

Would this work between the RX and the ESC's ?