The point of change
Posted: Mon May 10, 2021 6:04 am
I wrecked my 1/8 rc again tonight. Went out for a little jaunt at a local school, saw and chased a rabbit, did not see the concrete footing for the portable. Lost my right hub carrier, the steering turnbuckle bar snapped in half, and the right spindle bit it too. Technically that's only like $75 in damage, but you have to buy everything in pairs, so $150 for the damage, and another $50 for the rest of the metal upgrade parts I dont already have, and my car will be ready to drive again. ETA: 1 month.
So that's on hold, my 1/12 buggy project is on hold ($200 for the final step on that guy too), and all that's left is my 1/18th monster truck, which, I wrecked a rim last week with, and am back to stock tires (which are trash). Having difficulty finding 1/16th monster truck tires or rims for such tires made of aluminum or steel. Looking for 75mm x 45-55mm overall tire dimensions, monster truck tread or something akin to the Pro Line Badlands, with solid rims. That's going to be a few purchases and theories and testing from what I can tell shopping so far...
It really seals the deal though. I want an rc I can drive for a lot longer than 10-40 minutes, something not designed to break the sound barrier, and something for light cruising, crawling, and indoor as well as outdoor fun. Year round. That I wont break every time I take it out.
So definitely going to follow through with the heng long walker bulldog with all the metal bits and the 7.0 system and bb/IR systems in one purchase. It's only a bit more than finishing one of my 2 bigger rc's, and I feel as though I will get much more play time and much less shop time out of the deal. I am looking forward to shop time, but a couple hundred bucks and waiting for shipping and shop time to drive every time is getting... Expensive in a few ways.
I've looked into Taigen, and I must say that the Panzer IV Ausf G Winter Metal edition is absolutely stunning, but also just a bit far off of the price of the bulldog, and the metal Tiger 1 from HL is much more (obviously). For the money I have to burn, the things I want it to already have and do, I think the HL Bulldog will be best. I like the beginner friendly aspect, as well as the higher ground clearance than most of the other HL tanks (very 3d environment out here), and honestly, the 76mm barrels on those things just look cool.
If you have any pointers about known issues with the model, or tips or tricks or suggestions, they would be much appreciated. I am aware of the stock BB's they come with being garbage with seams that jam the gun, so that's fun, and I'm aware that it's one of their least scale-accurate models, which I'm quite alright with, and some kind of water proofing to the computer board is going to be beneficial, but other than that, total noob here, and totally stoked to get playing with something that's not gunna snap on me each time I play with it. I get it, the rabbit was my fault, but man, I was sooo close! 3 feet from it!! I know I could never actually get it, but 3 feet, man, that's a personal best for me at least!! Worth it.
Also, weight distribution, I'm curious, would anybody know or recommend that the weight be more forward of the hull for 'climbing' purposes? I'm aware this thing is not meant to climb up mountains, but seeing them crest over even obstacles, I gotta wonder...
Thanks for reading my rabbit saga. I must admit, I feel a bit like Elmer Fudd. Girlfriend thinks it's hilarious.
Happy Mothers Day to all those applicable...
So that's on hold, my 1/12 buggy project is on hold ($200 for the final step on that guy too), and all that's left is my 1/18th monster truck, which, I wrecked a rim last week with, and am back to stock tires (which are trash). Having difficulty finding 1/16th monster truck tires or rims for such tires made of aluminum or steel. Looking for 75mm x 45-55mm overall tire dimensions, monster truck tread or something akin to the Pro Line Badlands, with solid rims. That's going to be a few purchases and theories and testing from what I can tell shopping so far...
It really seals the deal though. I want an rc I can drive for a lot longer than 10-40 minutes, something not designed to break the sound barrier, and something for light cruising, crawling, and indoor as well as outdoor fun. Year round. That I wont break every time I take it out.
So definitely going to follow through with the heng long walker bulldog with all the metal bits and the 7.0 system and bb/IR systems in one purchase. It's only a bit more than finishing one of my 2 bigger rc's, and I feel as though I will get much more play time and much less shop time out of the deal. I am looking forward to shop time, but a couple hundred bucks and waiting for shipping and shop time to drive every time is getting... Expensive in a few ways.
I've looked into Taigen, and I must say that the Panzer IV Ausf G Winter Metal edition is absolutely stunning, but also just a bit far off of the price of the bulldog, and the metal Tiger 1 from HL is much more (obviously). For the money I have to burn, the things I want it to already have and do, I think the HL Bulldog will be best. I like the beginner friendly aspect, as well as the higher ground clearance than most of the other HL tanks (very 3d environment out here), and honestly, the 76mm barrels on those things just look cool.
If you have any pointers about known issues with the model, or tips or tricks or suggestions, they would be much appreciated. I am aware of the stock BB's they come with being garbage with seams that jam the gun, so that's fun, and I'm aware that it's one of their least scale-accurate models, which I'm quite alright with, and some kind of water proofing to the computer board is going to be beneficial, but other than that, total noob here, and totally stoked to get playing with something that's not gunna snap on me each time I play with it. I get it, the rabbit was my fault, but man, I was sooo close! 3 feet from it!! I know I could never actually get it, but 3 feet, man, that's a personal best for me at least!! Worth it.
Also, weight distribution, I'm curious, would anybody know or recommend that the weight be more forward of the hull for 'climbing' purposes? I'm aware this thing is not meant to climb up mountains, but seeing them crest over even obstacles, I gotta wonder...
Thanks for reading my rabbit saga. I must admit, I feel a bit like Elmer Fudd. Girlfriend thinks it's hilarious.
Happy Mothers Day to all those applicable...