Page 1 of 2
CLARK model's recoil and elevation kit for Tamiya Taigen Tig
Posted: Sun Mar 21, 2021 8:11 pm
by Michlss
Hello my name is Daniel and I come from Germany.
Since I don't speak English, I try to translate it as best I can with a translator.
I have an RC Tiger 1 from Taigen that I want to remodel.
at Clark-Model.com i have seen this unit, can someone tell me if this unit is good.
unfortunately this unit is not in Germany available.
this unit would cost me $ 80 and $ 10 shipping
can someone tell me if it's worth it.
Greetings daniel
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Sun Mar 21, 2021 8:21 pm
by john1970
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Sun Mar 21, 2021 8:24 pm
by Tiger6
You need to contact the user maxmekker, he is the EU local Clark dealer.
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Sun Mar 21, 2021 8:27 pm
by jarndice
Perhaps our own "MAXMEKKER" a certified Vendor on the Forum from Norway would be not only more helpful but cheaper,
His knowledge and ability to supply your "CLARK" requirements and at a more local level might help you.
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Sun Mar 21, 2021 8:33 pm
by tao
The unit from rctank.de in Germany is more expensive but works very well too. I installed two so far in Tiger and King Tiger.
https://www.rctank.de/Servo-recoil-and- ... -all-tanks
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Sun Mar 21, 2021 8:36 pm
by Michlss
Hi,
thank you for your help.
take a little longer to answer English is not my thing
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Sun Mar 21, 2021 9:40 pm
by Herr Dr. Professor
Welcome, Michlss. I find your English clear enough. There are a few on here who care native German speakers. If necessary, they can help clarify your questions.
Herzliches Wilkommen, Michlss. Sie haben Englisch ziemlich gut. Es gibt hier Mitglieder die im Deutschland angeboren war. Wenn nötig, können sie Ihre Fragen aufklären. (Sie sehen daß mein Deutsch ist als Nicht-Muttersprachler.
)
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Mon Mar 22, 2021 4:21 am
by Michlss
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Mon Mar 22, 2021 7:36 am
by Jussek
ello sirs
what Daniel is looking for (and I too) in the clark model 16004A, this recoil system actually has the pivoting axle of the gun between the trunnions, and not back inside like the rest
I've talked to Stian and he do not has this specific recoil model. In fact i've not seen it in any other shop that in the Clark's website itself. But IMHO it's highly overprized...
best regards
Re: CLARK model's recoil and elevation kit for Tamiya Taigen
Posted: Mon Mar 22, 2021 6:37 pm
by Michlss
Have Clark Model written to what this unit costs $ 80 and $ 10 shipping.
I have this elsewhere unit not yet seen.
I will however get this unit times order.