Page 2 of 7
Re: 1/16 Flak 36 88mm
Posted: Tue Mar 16, 2021 7:16 pm
by Son of a gun-ner
I'll take two
Re: 1/16 Flak 36 88mm
Posted: Tue Mar 16, 2021 8:09 pm
by Jimster
I tried so hard for so long to get a Merit kit and after building it I was disappointed by it’s small size. I was hoping to make it work but no chance unless used as a background model. In 1/16 scale there’s not much room for “background” models.
Re: 1/16 Flak 36 88mm
Posted: Tue Mar 16, 2021 8:59 pm
by Will01Capri
jarndice wrote:I dislike assumptions but assuming the Famo and the 88 will be sold by you will they be available as a matching pair as well as individually ?
That's the plan, it's the same on the 251 as I would make them with as few a part possible so can keep them interchangeable.
The base for the vehicle mount would be different but otherwise should work.
The famo is end if year project, but we will get there. Need to learn from the 251 first
Re: 1/16 Flak 36 88mm
Posted: Tue Mar 16, 2021 9:02 pm
by Will01Capri
Jimster wrote:I tried so hard for so long to get a Merit kit and after building it I was disappointed by it’s small size. I was hoping to make it work but no chance unless used as a background model. In 1/16 scale there’s not much room for “background” models.
Same here Jim.
I have 2x 1/18, but they are too small. So with this I decided to correct that issue and then also go a little further to try make it rc
Re: 1/16 Flak 36 88mm
Posted: Wed Mar 17, 2021 9:07 am
by Model Builder 4
Excellent work once again team WCP
with this and your planned Famo it will surely be an impressive beast
Cheers,Lee.
Re: 1/16 Flak 36 88mm
Posted: Wed Mar 17, 2021 6:44 pm
by Son of a gun-ner
Model Builder 4 wrote:Excellent work once again team WCP
with this and your planned Famo it will surely be an impressive beast
Cheers,Lee.
It all pales into insignificance compared to a 4x4 off road versatile 1 1/4 ton light utility truck
Re: 1/16 Flak 36 88mm
Posted: Wed Mar 17, 2021 8:25 pm
by Model Builder 4
Indeed Mick
Cheers,Lee.
Re: 1/16 Flak 36 88mm
Posted: Wed Mar 17, 2021 11:46 pm
by Will01Capri
Haha
Mick do you want me to mount one of the Flak36 in the back of the 1/4 ton utility truck? Hahahhahaha
Re: 1/16 Flak 36 88mm
Posted: Wed Mar 17, 2021 11:54 pm
by Son of a gun-ner
Will01Capri wrote:Haha
Mick do you want me to mount one of the Flak36 in the back of the 1/4 ton utility truck? Hahahhahaha
Well, I know you're mad enough to try it
But I'm ok with how it's going as is thanks
Re: 1/16 Flak 36 88mm
Posted: Fri Mar 26, 2021 8:04 pm
by Will01Capri