Page 5 of 5
Re: WCP RC MODELS
Posted: Fri May 14, 2021 5:29 pm
by Herr Dr. Professor
...and one more from Willi and Catherine:
Re: WCP RC MODELS
Posted: Fri May 14, 2021 5:44 pm
by Jimster
Looks like some quality engineering went into that model. I know my Kubelwagen is tough as nails and that Jeep certainly looks solid as a rock.
Re: WCP RC MODELS
Posted: Tue May 18, 2021 3:33 am
by Herr Dr. Professor
More pics of the "Truck, 1/4 ton type, 4X4"...
Note that this little guy has a full frame just like the real ones.
Part of the fun will be the instrument panel and the dash markings. I am thinking that Kilroy might have to show up somewhere, too. That's a figure my father, (WWII, Signal Corp., Master Sgt., South Pacific) taught me to draw
I still miss him after 33 years, as many of you probably understand.
Re: WCP RC MODELS
Posted: Fri Mar 10, 2023 4:00 pm
by Herr Dr. Professor
I did not want to start another thread for a few pictures of some simple painting. (O.K., it looks simple, but it turned out to be a matter of priming, finish coats, touch ups, and details, all with the help of an airbrush to get into all the nooks and crannies or crooks and nannies.) This is Will and Catherine's German WWII 8KW generator and 60 cm. searchlight. Any photos I found of original or restored units were in
Dunkelgrau, so
Dunkelgrau it is. I still need to get a 1S LiPo, and/or some JST connectors, but I try to get together a big list before I make the 60 mile round trip to my not-so-local hobby shop. I still need to tone down the blue by covering it with clear "lens maker."
- Generator Panel 1.jpg (332.29 KiB) Viewed 1226 times
- Searchlight 1.jpg (328.81 KiB) Viewed 1226 times
I wonder if there are some figures that might suit this little searchlight combination.
Re: WCP RC MODELS
Posted: Fri Mar 10, 2023 4:20 pm
by WCP RC MODELS
That looks great, thanks for sharing
We haven't as yet got figures that suit it, but i reckon we might be able to modify a Flak gunner in sat position a little to maybe look ok. Leave it with me and will talk to Will what can be achieved
I know he is working on a 1/6 version of both of these currently.
Remember on the searchlight the feet can rotate and alter the height so it can be levelled for un-even ground
Re: WCP RC MODELS
Posted: Sat Mar 11, 2023 4:14 am
by Herr Dr. Professor
Yes, at each coat of paint, I made sure the foot pads would free up to rotate. This afternoon I filled the lenses over the gauges with a product called Crystal Clear. I'm on the lookout for just the right size of black insulated wire to represent the cable on the reel. Little goodies like that are fun.