RC Tank Warfare community hobby forum

Title says it all.

Is there a simple set of instructions somewhere that covers assigning/re-assigning switch functions to specific board functions using the TK60G2?

The xmitter currently has the Tanker9XR software loaded and well as the ASP-06 and 07. I have managed to get main functions, sound, drive and a couple of others using the ASP-07 but not very well.

Barry

BarryC wrote:Title says it all.

Is there a simple set of instructions somewhere that covers assigning/re-assigning switch functions to specific board functions using the TK60G2?

The xmitter currently has the Tanker9XR software loaded and well as the ASP-06 and 07. I have managed to get main functions, sound, drive and a couple of others using the ASP-07 but not very well.

Barry

Hey Barry,

I can probably help here

tomhugill wrote:
Hey Barry,

I can probably help here

Tom, that would be awesome!

I have/am considering flashing new sw to the xmitter because the Tanker sw is no longer supported as I understand it.

I would still like to know how to assign specific functions to specific switches/controls. Hopefully it a manner that a neophyte like myself can understand.

Barry

Yes, you should start flashing new software to it, and nobody should use tanker9x anymore. Latest version is from two days ago, and it updates like twice in a month.
https://openrcforums.com/forum/viewtopic.php?t=4676

Hi Rad,

Is this the procedure I need to follow?

https://www.youtube.com/watch?v=BOEvvDpWEb8

Barry

BarryC wrote:Hi Rad,

Is this the procedure I need to follow?

https://www.youtube.com/watch?v=BOEvvDpWEb8

Barry

Hi, you can follow that video, or you can flash it directly with the radio. You can copy the software file either in the SD card or to connect the radio to the computer with the cable.

Id do the SD card and flash with the radio, is easier and faster and you cannot do it wrong, but both ways work.

Thanks Rad!

Barry