3D printable Jagdpanzer 38t Hetzer in scale 1/6
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Those 3 cans were for primer only, my Hetzer has had to go into storage while I have my cellar converted into a new workshop. It’s taking a lot longer than I was expecting.
I was told 9 days, it’s now been 4 months....
Sent from my iPhone using Tapatalk
I was told 9 days, it’s now been 4 months....
Sent from my iPhone using Tapatalk
- Xiaoshan_Sailor
- Sergeant
- Posts: 708
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Watching with interest!
- HERMAN BIX
- Brigadier
- Posts: 10335
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Me too
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
-
- Lance Corporal
- Posts: 133
- Joined: Sat Oct 03, 2020 4:34 am
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
It looks awesome man. Absolutely fantastic.
I am not on Facebook and my lap top is just about to come back from warranty so.
How much and where can I buy your 1/6 Hetzer STL files ?
How long does the longest print take ?
Size overall , how long ? weight finished ?
Again fantastic job man.
I am not on Facebook and my lap top is just about to come back from warranty so.
How much and where can I buy your 1/6 Hetzer STL files ?
How long does the longest print take ?
Size overall , how long ? weight finished ?
Again fantastic job man.
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Thank you.
It will be available soon on Cults3D.
1/16 version is already there.
https://cults3d.com/en/3d-model/various ... 6-rc-model
Price will be very close to the 1/16 version and there will be a special price for the 1/16 version owners.
How long is take?I dont have idea, honestly.
400 hours, maybe?Really dont know.I stopped counting very fast.
There is about 8-9kg of material on the hull right now, i think.
Weight of the finished vehicle can be about 14kg, i think.Maybe
Dimensions of the hull are about 80x43x28cm right now.
(31,5x17x11 inch)
Have some new photos.Hull is assembled.Just need to add details.
Going to paint that all.
Have to assemble tracks and to do some test rides.
After that, it can be released.
It will be available soon on Cults3D.
1/16 version is already there.
https://cults3d.com/en/3d-model/various ... 6-rc-model
Price will be very close to the 1/16 version and there will be a special price for the 1/16 version owners.
How long is take?I dont have idea, honestly.
400 hours, maybe?Really dont know.I stopped counting very fast.
There is about 8-9kg of material on the hull right now, i think.
Weight of the finished vehicle can be about 14kg, i think.Maybe
Dimensions of the hull are about 80x43x28cm right now.
(31,5x17x11 inch)
Have some new photos.Hull is assembled.Just need to add details.
Going to paint that all.
Have to assemble tracks and to do some test rides.
After that, it can be released.
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Looking good
Longest print for me was the front section at 8 days, but it depends on your settings.
Definitely worth every minute
Cheers
Wayne
Sent from my bunker using a carrier pigeon
Longest print for me was the front section at 8 days, but it depends on your settings.
Definitely worth every minute
Cheers
Wayne
Sent from my bunker using a carrier pigeon
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Thank you.
It was 6,5 days, but it was my bad.
I have choosen honeycomb infill for this.It was a mistake.
With a rectilinear (or grid) infill, it will took much less time to print.
There is a high number of deccelerations with this honeycomb infill.
Much more time consuming.I think i can print that in 5 days with rectilinear infill.
Anyway - 0,2mm layer, 0,4mm nozzle, 70mm/s with customized Chiron with Klipper firmware.
Going to eliminate ghosting with Resonance Compensation (Input shaping) function of the Klipper.
I want to use adxl345 accelerometer for this, to make really good calibration.
With this, i can go even faster with zero ghosting.
It will be a great improvement for production of this kit.
It was 6,5 days, but it was my bad.
I have choosen honeycomb infill for this.It was a mistake.
With a rectilinear (or grid) infill, it will took much less time to print.
There is a high number of deccelerations with this honeycomb infill.
Much more time consuming.I think i can print that in 5 days with rectilinear infill.
Anyway - 0,2mm layer, 0,4mm nozzle, 70mm/s with customized Chiron with Klipper firmware.
Going to eliminate ghosting with Resonance Compensation (Input shaping) function of the Klipper.
I want to use adxl345 accelerometer for this, to make really good calibration.
With this, i can go even faster with zero ghosting.
It will be a great improvement for production of this kit.
facebook.com/warprints
- HERMAN BIX
- Brigadier
- Posts: 10335
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
50koruny wrote:Thank you.
It was 6,5 days, but it was my bad.
I have choosen honeycomb infill for this.It was a mistake.
With a rectilinear (or grid) infill, it will took much less time to print.
There is a high number of deccelerations with this honeycomb infill.
Much more time consuming.I think i can print that in 5 days with rectilinear infill.
Anyway - 0,2mm layer, 0,4mm nozzle, 70mm/s with customized Chiron with Klipper firmware.
Going to eliminate ghosting with Resonance Compensation (Input shaping) function of the Klipper.
I want to use adxl345 accelerometer for this, to make really good calibration.
With this, i can go even faster with zero ghosting.
It will be a great improvement for production of this kit.
I just put that into google translate and it still didn’t make sense to me !!
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Sorry for my english
Which part exactly?
Or the whole thing?
Which part exactly?
Or the whole thing?
facebook.com/warprints
- HERMAN BIX
- Brigadier
- Posts: 10335
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6
Sorry Mr Koruny, just my way of saying how smart you 3D printer guys are compared to the likes of me
What you wrote might as well be in Ancient Egyptian for all I know...............the dark art of 3D printing is a very clever art indeed
What you wrote might as well be in Ancient Egyptian for all I know...............the dark art of 3D printing is a very clever art indeed
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85