Need some help!
Posted: Mon Nov 09, 2020 3:29 pm
Hello from the USA!
I am new to the site, and could use some help!
I was not able to find the answers to my specific questions.
I am working on film project that will be utilizing RC 1/16 US Armor, i.e. M1 Abrams, M113, M2 Bradley, and 5 ton trucks. I am currently looking for RC 1/16 M113A2/A3, M2 Bradley and US M939 5 ton trucks. I will also be utilizing RC 1/16 MRAPS, Trumpeter Kits converted to RC.( Doing research on that now).
I am not in a position to fabricate the M113 or Bradley'. I am on a limited budget for this project, and need to know what these vehicles would run me to have built?
I am aware the OKOM Products company in Hong Kong. And have emailed Carson directly a few weeks ago, and have not got a response back yet. I am sure due to the current situation there may be the reason.
I would appreciate any assistance in this matter.
Thank you
Bludmon
Recruit
Posts: 2
Joined: Tue Oct 13, 2020 1:42 pm
Location: USA Nevada
I am new to the site, and could use some help!
I was not able to find the answers to my specific questions.
I am working on film project that will be utilizing RC 1/16 US Armor, i.e. M1 Abrams, M113, M2 Bradley, and 5 ton trucks. I am currently looking for RC 1/16 M113A2/A3, M2 Bradley and US M939 5 ton trucks. I will also be utilizing RC 1/16 MRAPS, Trumpeter Kits converted to RC.( Doing research on that now).
I am not in a position to fabricate the M113 or Bradley'. I am on a limited budget for this project, and need to know what these vehicles would run me to have built?
I am aware the OKOM Products company in Hong Kong. And have emailed Carson directly a few weeks ago, and have not got a response back yet. I am sure due to the current situation there may be the reason.
I would appreciate any assistance in this matter.
Thank you
Bludmon
Recruit
Posts: 2
Joined: Tue Oct 13, 2020 1:42 pm
Location: USA Nevada