This was posted on RCU, but I was excited enough that I bought one of each:
http://www.torro-shop.de/1-16-RC-Maxx-Pro-MRAP_1
http://www.torro-shop.de/1-16-RC-M-ATV-MRAP_1
Looks like Torro has R/C'd the 1/16 Trumpeter MRAPs. I already have the static versions that I was planning on R/C'ing, but since they did it for me I might sell my static kits.
Derek
1/16 R/C MRAPS
- tankme
- Warrant Officer 1st Class
- Posts: 1999
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
1/16 R/C MRAPS
Derek
Too many project builds to list...
Too many project builds to list...
- Kaczor
- Warrant Officer 1st Class
- Posts: 1816
- Joined: Fri May 18, 2018 9:58 am
- Location: Ciechanow, Poland
- Contact:
Re: 1/16 R/C MRAPS
Please make review when they came I'm curious about suspension.
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 7007
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: 1/16 R/C MRAPS
For those in the UK, forgebear is stocking these
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
Re: 1/16 R/C MRAPS
Hi.
Nice to see,
I wondered when some one else was going to do it...should go well with my scratch built Cougar MRAP
viewtopic.php?f=202&t=29804
Regards.
Sub.
Nice to see,
I wondered when some one else was going to do it...should go well with my scratch built Cougar MRAP
viewtopic.php?f=202&t=29804
Regards.
Sub.
- tankme
- Warrant Officer 1st Class
- Posts: 1999
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: 1/16 R/C MRAPS
My MRAPs got here from Germany mostly intact. I had to do some minor repairs to them. The doors need to be taped closed and that would've stopped the damage. They do not have any suspension, they are only two wheel drive, and they are very fragile so they are not for crawling or bashing. The tires are a little hard, but they are exactly the same tires that come in the static kits. Overall I'm happy with them so far. The build quality of the kit is quite high. I don't see any sanding marks or sprue leftovers on the parts. The electronics are the same as what is in the M16 halftrack. Still need to get them out for a test drive. I may still build the two static kits I have into R/C so they can be four wheel drive with a suspension. That's a long way down the road so these will fill the void until that time. The static kits are bought and paid for so no hurry to sell them at this point. I'll see if I can get a video made this weekend of them running. I have full photos over at RCU. I'll have to find away to upload them to be viewed here.
Derek
Too many project builds to list...
Too many project builds to list...
- Xiaoshan_Sailor
- Sergeant
- Posts: 709
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: 1/16 R/C MRAPS
Ouch. After seeing that post over at RCU, I'd take a pass on this & get HG's larger P602 MRAP. Just like the Hummer I have, they are built like a proverbial brick Scheisse Haus given all the metal used & come with all wheel drive.
https://youtu.be/X-Rrrv73PIE
https://youtu.be/X-Rrrv73PIE
- tankme
- Warrant Officer 1st Class
- Posts: 1999
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: 1/16 R/C MRAPS
Looks like there won't be a video at this point. My satisfaction level for these two vehicles has taken a massive drop this evening. I was testing out the Maxxpro, everything was looking good, put it down on the carpet, it ran for about 2 min, and then died. No lights and no movement. I took the batteries out and put them in the M-ATV. It started up and ran around, but there was so much lag in the controls that I kept hitting things. Even firing the gun or turning the turret created a massive lag from when you let off to when it stopped. I will go out and get a bunch of fresh batteries to make sure it's not the batteries, but it was no fun to drive like that. Nothing I did would get the Maxxpro to start up again. I took the battery pack out of the M-ATV which was working and used in the Maxxpro and nothing turned on. Both battery packs use the same amount of batteries. I knew there was a reason I never buy things right when they are released.
Derek
Too many project builds to list...
Too many project builds to list...
- tankme
- Warrant Officer 1st Class
- Posts: 1999
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: 1/16 R/C MRAPS
Looks like a Youtuber has the same electronics issue with his M-ATV as I did with my Maxxpro - electronics dead after a few minutes of running. https://www.youtube.com/watch?v=GHI4FS3 ... m-comments
Derek
Too many project builds to list...
Too many project builds to list...