gears
- forgebear
- Warrant Officer 1st Class
- Posts: 1809
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
gears
hi guys we have a few of the new heng long gearboxes in stock
both high low motor ones fit heng long bases p3 /4 stug tiger 1 tiger 2 chally kv1 pershing bulldog panther G jagdpanther
will be on the website later tonite
size of drive shafts are
8mm x55mm long
8mm x 49 mm short
https://www.forgebeartanks.com/store/c32/Gearboxes.html
thanks dave
both high low motor ones fit heng long bases p3 /4 stug tiger 1 tiger 2 chally kv1 pershing bulldog panther G jagdpanther
will be on the website later tonite
size of drive shafts are
8mm x55mm long
8mm x 49 mm short
https://www.forgebeartanks.com/store/c32/Gearboxes.html
thanks dave
Last edited by forgebear on Mon Oct 19, 2020 5:20 pm, edited 3 times in total.
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6940
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: gears
And still no special boxes for the Sherman
It's downright Shermist. . . .
It's downright Shermist. . . .
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6940
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: gears
Dave, would you be stating in your listings the overall width, as in, end of shaft to end of other shaft? As well as the unit width excluding the shafts?
I ask, as this information would be very useful for scratch builders
Or people like me that would like to know if I could bodge one of these boxes into the wrong tank
I ask, as this information would be very useful for scratch builders
Or people like me that would like to know if I could bodge one of these boxes into the wrong tank
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: gears
Mick, with a grinder and some sticks like sh*t anything is possible
I would be interested to know if the HL/PDSGB are interchangeable as the baseplate looks just like the PDSGB
one
I would be interested to know if the HL/PDSGB are interchangeable as the baseplate looks just like the PDSGB
one
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6940
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: gears
We can't post pictures in this part of the forumLudwig von wigbearer wrote:Mick, with a grinder and some sticks like sh*t anything is possible
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
- tankme
- Warrant Officer 1st Class
- Posts: 1990
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: gears
Wonder why they have a different high or low motor position option? Jimster, there is very little information about them online as they are brand new for HL. I saw them a while back, but Forgebear is the first vendor I've seen that has got a shipment besides when I saw them on Ebay months ago. I should've picked one up back then for the hell of it, but I didn't know they would disappear for this long.
Derek
Too many project builds to list...
Too many project builds to list...