Igarashi N2738-51 Motors
Posted: Thu Oct 08, 2020 4:46 pm
Hi all, just fitted these into a tiger 1, excellent results with a nice slow controllable speed, also fitted
rivnuts to the metal baseplate that the gearboxes normally screw onto, the gearboxes now are bolted firmly in position, bit of mare to start with as the motors were a sort of interference fit, ground a couple of mm from the shaft on the motor end bell but I am happy with the end result
rivnuts to the metal baseplate that the gearboxes normally screw onto, the gearboxes now are bolted firmly in position, bit of mare to start with as the motors were a sort of interference fit, ground a couple of mm from the shaft on the motor end bell but I am happy with the end result