Page 1 of 1
Fitting taigen flash unit to heng long 6.0s edition
Posted: Sat Sep 26, 2020 7:11 pm
by Rocketman
Hi chaps..
Just treated myself to a shiney new king tiger with a 6.0s board.
I've fitted Flash units to all my other ranks but I have no experience with this board.
So, before I crack it open can someone advise me of best practice with the new system please.
Ta muchly
Rckt
Re: Fitting taigen flash unit to heng long 6.0s edition
Posted: Sat Sep 26, 2020 8:13 pm
by Jofaur86
Hello
This fahs is Led 1,the gun switch must be CN 6 ( Trigger ) which controls the flash
- IMG_6634.JPG (66.22 KiB) Viewed 1291 times
Re: Fitting taigen flash unit to heng long 6.0s edition
Posted: Sun Sep 27, 2020 9:54 am
by Rocketman
Hi and thanks for the reply.
So, do you recommend just wiring an led into that port?
The Taigen flash unit has a two pin and a five pin unit. Can that be used just omitting the five pin?
And lastly you mention the trigger line. What do you do with that?
And thankyou in advance!
Re: Fitting taigen flash unit to heng long 6.0s edition
Posted: Sun Sep 27, 2020 9:44 pm
by john1970
If its just xenon flash you want then you can do it this way
viewtopic.php?f=79&t=30525
but you will need to cut up the BB gun to get the flash down the barrel
Re: Fitting taigen flash unit to heng long 6.0s edition
Posted: Mon Sep 28, 2020 8:16 pm
by Rocketman
OK thanks. If I want to just wire an led in what voltage should I aim for?