RC Tank Warfare community hobby forum

I’ve tried pairing to the the remote but it just won’t do anything. I’ve got power on both the tank and the remote but it’s not doing anything ... I’ve opened both up but I’ve no idea what I’m looking for ...

Help!

Scott

Er....have you tried pressing the 'engine' start button?
What version of HL's electronics do you have in there? It would help to know

hi i dont know what version you have
have a look on the under side where the battery is see if there is a black button if so
follow this
turn on the radio and the tank
press and hold the start button on the radio
press the small black button in the base of the tank in the battery box

43rdRecceReg wrote:Er....have you tried pressing the 'engine' start button?
What version of HL's electronics do you have in there? It would help to know

I don’t know.. can’t find any markings .. can you tell from this photo


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder

forgebear wrote:hi i dont know what version you have
have a look on the under side where the battery is see if there is a black button if so
follow this
turn on the radio and the tank
press and hold the start button on the radio
press the small black button in the base of the tank in the battery box

Yep tried all that and in various different orders too... makes no difference


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder

if you look at the left hand side of the board there is a 3 pin wire track that back you should find a black button in your battery box of the tank
turn on the tank
and radio
press and HOLD the start button on the transmitter press the binding button that you found in the battery box on the tank
it will bind and start
dave

forgebear wrote:if you look at the left hand side of the boar there is a 3 pin wire track that back you should find a black button in your battery box of the tank
turn on the tank
and radio
press and HOLD the start button on the transmitter press the binding button that you found in the battery box on the tank
it will bind and start
dave

Dave... not it won’t!! Lol


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder

ok if thats wont do it its either the board or the transmitter
did you find the small black button

Yes. Tried all different combinations of pressing the buttons to get it to bind but as Del Trotter one said “nitto”


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder