Torro/Taigen kit Tiger

This section is for builds that are not strictly Tamiya or Heng Long. For instance, replacing the electronics from a WSN or Matorro, or even a scratch-build.
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Tracks painted
Using lacquer this time
Using lacquer this time
The real tracks had manganese so very little rust.
The real tracks had manganese so very little rust.
Screen Shot 4.png (340.77 KiB) Viewed 2076 times
Almost got it.  Lighter lacquer mist next .
Almost got it. Lighter lacquer mist next .
User avatar
Jimster
Lieutenant
Posts: 3058
Joined: Mon Dec 10, 2018 1:51 am
Location: Illinois

Re: Torro/Taigen kit Tiger

Post by Jimster »

Looks good. Tracks are often not well represented but I think you did well.
User avatar
HERMAN BIX
Brigadier
Posts: 10332
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

Re: Torro/Taigen kit Tiger

Post by HERMAN BIX »

I agree with that mate, what is your colour combination ?
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Herman here are the colours , just kept on mixing until i had a colour a little darker in the bottle. Tamiya LP 61, LP 13, LP 40, LP 62 and MR hobby 217. Should buy a few brown and green Lacquer ones to try other mixes for tracks. Some say that they are tougher than acrylics.
PA296137.jpg
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Put a magnet into the tow cable , stops it moving about and easy to remove for opening up hull.
Exhaust covers need  work to blend in paint .
Exhaust covers need work to blend in paint .
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Almost forgot the c hook on the front deck, went well. Pic will show better than a big description. :haha:
styrene tube
styrene tube
it fits .
it fits .
drilled the locking bars
drilled the locking bars
Couple of voyager wing nuts
Couple of voyager wing nuts
Job done, fiddly painting now.
Job done, fiddly painting now.
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Almost finished, cant find the fire extinguisher or the other half of the starter handle. Dirtied the tank up with some oils, a couple of streaks to fix.
Some oils on
Some oils on
Flash highlights the brown, strange never used any.
Flash highlights the brown, strange never used any.
This side needs a little more playing about with the oils.
This side needs a little more playing about with the oils.
Better view of the command aerial.
Better view of the command aerial.
Some streaks to fix.
Some streaks to fix.
Added wear on the turret roof.
Added wear on the turret roof.
Paint masks for numbers give great results and easy to scratch and chip if you want .
Paint masks for numbers give great results and easy to scratch and chip if you want .
Attachments
Don't think i applied a matt to the jerry cans.
Don't think i applied a matt to the jerry cans.
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Found the starter handle , thought about making the fire extinguisher , need the Tamiya one. Will use Blue Stuff to mould one as its the easy option.
Screen Shot.jpg
PA306156.jpg
Added voyager clamps , too much hassle to make them working superglued .
Added voyager clamps , too much hassle to make them working superglued .
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Starter handle done
Lucky with the crow bar
Lucky with the crow bar
Starter handle in position,cheated with the Aber clamps,They want you to glue/solder a little standoff, Easier to use a tiny styrene rectangle,
Starter handle in position,cheated with the Aber clamps,They want you to glue/solder a little standoff, Easier to use a tiny styrene rectangle,
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Torro/Taigen kit Tiger

Post by ronnie42 »

Cleared the paint off the convoy light, this is an easy add-on as shown here viewtopic.php?f=145&t=30723
light fixed.
light fixed.
Post Reply

Return to “Other Builds”