Barrel distrace problem in 3D recoil
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Barrel distrace problem in 3D recoil
Hi everybody. Can anyone help me with that? The Taigen Tiger metal barrel is very short to fit in the 3D recoil system...!It has no thin long tube to fit in properly..I can't find any solution..... Thank you.
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: Barrel distrace problem in 3D recoil
I find one solution.....Make shorter the unit!!!!!
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
Re: Barrel distrace problem in 3D recoil
Why don't you make one , rc robotic shops or Ebay have all the parts needed. Here is one i made for the King Tiger
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: Barrel distrace problem in 3D recoil
Its very nice.....And where u place the servo ? It must moove up and down with that ....!
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
Re: Barrel distrace problem in 3D recoil
Cut the narrow bit of tube out, drill the barrel out and use some longer brass tubeleopardgreece wrote:I find one solution.....Make shorter the unit!!!!!
????? ?? SM-N950F ???????????? Tapatalk
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: Barrel distrace problem in 3D recoil
Its cool solution but i don't have much time to find any brass tube Thank you very very much i ll keep it in mind
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
Re: Barrel distrace problem in 3D recoil
The servo bracket goes on the square support ,just need to fit a cog to the servo and check position for clearance.
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: Barrel distrace problem in 3D recoil
? will try my mode and if it fails i would like to try the mode with the extended tube. I like it very much
????? ?? SM-P605 ???????????? Tapatalk
????? ?? SM-P605 ???????????? Tapatalk
Re: Barrel distrace problem in 3D recoil
Both the Clark and JCC recoil units extend out to the front of the recoil unit, so those are alternative options should your modifications not work out.
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: Barrel distrace problem in 3D recoil
Ok my friend thank you very much I will search for them
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk