Page 1 of 2
Smoke generator voltage 6 or 7.4V
Posted: Wed May 13, 2020 10:39 am
by chumanji9
Hi all,
I am very new to the Tank world. I would like to purchase a smoke generator. I notice there are 6 and 7.4 volt smoke generators. Which is compatible with the Henglong TK6.1s board?
Re: Smoke generator voltage 6 or 7.4V
Posted: Wed May 13, 2020 11:51 am
by RenoirLV
Correct me if I’m wrong but the voltage there means the fan voltage or the pump voltage. I believe 7.4v will be fine.
Sent from my iPhone using Tapatalk
Re: Smoke generator voltage 6 or 7.4V
Posted: Wed May 13, 2020 11:59 am
by 43rdRecceReg
- Heng Long v6 and V6.1 compatible smoker
This unit, sold by Andrew Haya should be fully compatible with the V6.1s unit, I believe.
https://www.hayaltd.co.uk/New_Version_S ... 71508.aspx
One of these days, he'll learn to use 'Landscape' mode for videos.
Re: Smoke generator voltage 6 or 7.4V
Posted: Wed May 13, 2020 1:30 pm
by RenoirLV
If anyone is interested these fan motors come from AliExpress for about 3eur a piece. If you already have a tarr type of smoker this could make a welcome upgrade.
Sent from my iPhone using Tapatalk
Re: Smoke generator voltage 6 or 7.4V
Posted: Wed May 13, 2020 3:31 pm
by Max-U52
That looks like the unit they're putting in the turret on the Abrams to give smoke from the barrel when you fire the main gun.
Re: Smoke generator voltage 6 or 7.4V
Posted: Wed May 13, 2020 3:31 pm
by Max-U52
Now I'm wondering why the first photo didn't appear when I quoted Roy's post.
Re: Smoke generator voltage 6 or 7.4V
Posted: Wed May 13, 2020 8:30 pm
by chumanji9
Thanks for all the reply guys. I was interested in that exact smoker in one of the early post with the youtube video. I saw it on aliexpress and thought the price was reasonable.
Re: Smoke generator voltage 6 or 7.4V
Posted: Thu May 14, 2020 7:21 am
by Tinsen
Heng Long tk 6.0S and 6.1S at CN11 and CN12 port feed 6.0 v constant not like 6.0 CN11 feed at battery voltage.
That :s mean if you use 3S lipo CN11 feed 12.6v first.
Re: Smoke generator voltage 6 or 7.4V
Posted: Thu May 14, 2020 5:53 pm
by Son of a gun-ner
Tinsen wrote:Heng Long tk 6.0S and 6.1S at CN11 and CN12 port feed 6.0 v constant not like 6.0 CN11 feed at battery voltage.
That :s mean if you use 3S lipo CN11 feed 12.6v first.
3S Lipo with a Heng Long control board? Is that possible?
Re: Smoke generator voltage 6 or 7.4V
Posted: Thu May 14, 2020 7:58 pm
by jimbo_wa
Son of a gun-ner wrote:
3S Lipo with a Heng Long control board? Is that possible?
Yep, TK-6.1s is 3S capable.
Sent from my iPad using Tapatalk