RC Tank Warfare community hobby forum

Hi new to the forum and r/c tanks in general. I have a problem with the controls on my challenger 2 and the settings seem to have changed and now the left control stick is doing forwards and back and turret left and right and the right stick is doing left and right direction and barrel up and down and I have no idea how to change it back so it’s back to standard can anybody help please. Many thanks Rob

Hi there. I've never heard that problem before and have no idea what could be causing it. If it were a hobby grade TX, like a spektrum or flysky I'd say switch the servo cables at the RX but you can't do that with the stock Heng Long. I wish i could help (I'm mainly posting so you won't think you're being ignored), and I'll be watching to see what happens.

Now, you really should post something in the "Introduce Yourself" section. There are guys here that may be able to help, but it's considered bad form here to ask questions without a proper intro, so you may find more help after posting your introduction. Just a bit about your hobby background and what country you're in should suffice. I'll welcome you properly there.

Ok cheers for advice but found out that if you hold the G button and pull back on the left stick it gives a bib noise and switches the control round.