RC Tank Warfare community hobby forum

Good afternoon,
I recently installed a smoke generator and it works fine, but the gun traverse is no raising or lowering. Was wondering if anyone out there has the wiring schematic for the Hooben Elerant Jagdpanzer. Any help would be great.

Doesn't the hooben use a Clark TK-22 board?

It's not a Clark TK-22 board but thank you for the input. I had a loose wire that l was able to soder. Also when l unplugged the lead to the barrel traverse for up and down l removed the female socket as well as the Male off the board. Thank you again for responding.
John